Multi Sensor Shield for Arduino Nano with Light, Magnetic Field & Temperature Sensor
https://www.electronics-lab.com/news/multi-sensor-shield-arduino-nano-light-magnetic-field-temperature-sensor/
This Arduino Nano Shield consists of a Light sensor, a Magnetic field sensor, and Temperature sensor. The shield can be used to develop various projects required light sensing, magnetic field sensing, and temperature sensing. All sensors provide analog voltage outputs, so each output is connected to analog inputs of Arduino Nano. Sensors OPT101 High Sensitive […]
Li-Po/Li-Ion Arduino Charger Shield using BQ21040
https://www.electronics-lab.com/news/li-po-li-ion-arduino-charger-shield-using-bq21040/
This Li-Po/Li-ion Arduino charger shield is mainly designed to power up the Arduino from single 3.6V Li-Po battery. Li-Ion and Li-Pol Charger/ DC-DC Boost converter Arduino shield provides 6.5V/400mA from single Lithium Polymer battery. The Arduino shield is equipped with BQ21040 battery charger IC and CS5171 step up DC-DC converter. The shield also has prototype […]
KB-IDE Supports Arduino, ESP32 and others in Dual Style Coding
https://www.electronics-lab.com/news/kbide-supports-arduino-esp32-others-dual-style-coding/
Maker Asia is an organization in South East Asia which owns Maker Lab; a place where makers put their creativity in use. They have recently released a new software product and Maker Asia, who have mostly focused on a hardware product line is eventually into a new space. The newly launched product is an open […]
Arduino Clock on IN-18 Nixie Tubes with a LONG Service Life
https://www.electronics-lab.com/news/arduino-clock-18-nixie-tubes-long-service-life/
Build your own Nixie tube clock/thermometer/display with ease. by Grisha Anofriev @ www.hackster.io We set out to create a Nixie clock or just an information indicator on the largest ex-Soviet IN-18 tubes as an Arduino shield-compatible with both Uno and Mega boards. After a long reading of lots of information about IN-18 tubes on the […]
Getting Started with the Arduino IoT Cloud
https://www.electronics-lab.com/news/getting-started-arduino-iot-cloud/
IoT is now mainstream. It has gone beyond the buzzword it used to be and several tools are being made available to makers to facilitate the development of solutions based on it. One of the newest IoT platforms is the Arduino IoT Cloud developed by our good friends at Arduino.cc. Today we will examine how […]
Avnet Silica WiFi Shield based on AW-Cu300A module
https://www.electronics-lab.com/news/avnet-silica-wifi-shield-based-aw-cu300a-module/
Based on AW-Cu300A module, providing Arduino pinout connectors. Arduino Connector provides ultimate flexibility, leveraging on huge ecosystem of compatible boards, choose the microcontroller board that best fits your application and mix with sensors and other peripherals boards. The board comes with Pmod connectors for extended compatibility with additional boards. The module is based on the […]
PocketScreen is a Palm Sized Arduino-Compatible Multi-Purpose Device
https://www.electronics-lab.com/news/pocketscreen-palm-sized-arduino-compatible-multi-purpose-device/
Arduino lovers looking for a tiny development board and Arduino compatible multitool, may look no further, because a new tiny board is being developed. Engineers at Zepsch based in Ludwigsburg Germany, have developed the PocketScreen, a small form Arduino compatible multi purpose device. PocketScreen springs from a Kickstarter funding campaign. Last year, Zepsch ran a […]
Arduino Introduces 4x new Nano boards
https://www.electronics-lab.com/news/arduino-introduces-4x-new-nano-boards/
Arduino has begun pre-orders for four new 45 x 18mm Nano form-factor boards. They include a $10 “Arduino Nano Every” model, a faster “WiFi/BT-enabled IoT” model, and two BLE boards. The Arduino Nano Every Substitutes the ATmega328P-based Arduino Uno-like Nano 3, equipped with ATMega4809, which is more powerful, and energy-efficient, and previously present in Arduino […]
ATTO – The World’s Smallest Arduino Compatible Board
https://www.electronics-lab.com/news/atto-worlds-smallest-arduino-compatible-board/
Atto is the world’s smallest Arduino compatible board! It is based on the ATmega32U4 microcontroller and comes with reset push-button as well as an RGB (rainbow) LED controlled by 3 PWM channels. The new Arduino board is 10.3 mm x 11.5 mm (0.40” x 0.45”) and it has an onboard reset button as well as […]
16×2 LCD Shield for Arduino Nano
https://www.electronics-lab.com/news/16x2-lcd-shield-arduino-nano/
This 16×2 LCD shield for Arduino Nano includes various addons, like 5 Tactile Switches, 3 Trimmer Potentiometers, LM35 Temperature sensor and the 16×2 LCD itself. It’s a compact shield designed to fit in small enclosures and it is intended to develop measuring devices like thermometers, voltmeters, timers, up down counters and other various project requiring […]