TEA5767 – FM Receiver Module
https://www.electronics-lab.com/news/tea5767-fm-receiver-module/
Based on the chip of the Philips TEA5767, this tiny module allows to realize, with the addition of very few external components, a stereo FM radio with reception frequency from 87.6 MHz to 108 MHz .. Used in MP3 players, MP4, mobile phones, etc. The single-chip TEA5767/68 is a miniature, digitally tuned radio IC that […]
Zero BZ1 Arduino Board comes with SD and LiPo charger
https://www.electronics-lab.com/news/zero-bz1-arduino-board-comes-sd-lipo-charger/
One of the most beautiful things about using the Arduino ecosystem is its stackable ideology, where you can easily add new functionality to almost any Arduino board and make the bare metal Arduino board look so powerful. Hackers can decide to add an IoT add-on, SD storage add-on, or even a display add-on to a plain […]
3.6A Bidirectional DC Motor Driver Shield for Arduino Nano
https://www.electronics-lab.com/news/3-6a-bidirectional-dc-motor-driver-shield-arduino-nano/
This is another Arduino Nano shield which can drive a Brushed DC Motor in both directions with PWM signal for speed control and it also includes current trip feature. Project is based on DRV8870 IC which can handle current up to 3.6Amps, The shield also includes an IR sensor and trimmer potentiometer. Trimmer Pot helps […]
Arduino MKR Motor Carrier
https://www.electronics-lab.com/news/arduino-mkr-motor-carrier/
Want to connect several motors and sensors to your mechatronic project? The Arduino MKR Motor Carrier is the perfect companion for Arduino MKR boards as it will allow you to rapidly prototyping and build your projects. The MKR Motor Carrier is an MKR add-on board designed to control servo, DC, and stepper motors. The Carrier […]
PowMeter Shield Nano – Tiny power monitor shield for Arduino
https://www.electronics-lab.com/news/powmeter-shield-nano-tiny-power-monitor-shield-arduino/
The powerful, tiny power monitor shield for your Arduino Nano. Constantly and completely monitor your Arduino project’s power consumption with the PowMeter shield. This versatile solution replaces up to four multimeters with a ten gram device. Advantages of PowMeter Nano: A very small footprint. The shield attaches directly to your Nano, adding only 23 millimetres […]
Sony’s Spresense Multicore Microcontroller made for IoT development
https://www.electronics-lab.com/news/sonys-spresense-multicore-microcontroller-made-iot-development/
Spresense is a compact development board based on Sony’s power-efficient multicore microcontroller CXD5602. It allows developers to create IoT applications in a very short time and is supported by the Arduino IDE as well as the more advanced NuttX based SDK. Integrated GPS – The embedded GNSS with support for GPS and GLONASS enables applications where […]
Elegoo Gift Guide Is for a Complete Arduino Starter Kit with 20% discount
https://www.electronics-lab.com/news/elegoo-el-kit-001-complete-hands-arduino-starter-kit/
Arduino is an open source software and electronics platform that has evolved the open hardware, DIY (do it yourself), makers, STEM, and the electronics industry. Arduino has grown to be one of the best learning platforms for young engineers and students. Using an Arduino a student new to electronics and embedded systems can easily build […]
Prestissimo Uno+: Arduino with more I2C UART SPI ADC IO PWM
https://www.electronics-lab.com/news/prestissimo-uno-arduino-i2c-uart-spi-adc-io-pwm/
All the simplicity of the Arduino Uno plus extra I2C UART SPI ADC IO and PWM channels. A development board for the new ATmega328PB MCU. The Prestissimo Uno+ is a platform for rapid electronics development and prototyping that brings us the simplicity, ease of use and reliability of the Arduino Uno but with extended functionality. […]
SAMD21 LoRa Development Board with GPS
https://www.electronics-lab.com/news/samd21-lora-development-board-gps/
Michael Krumpus designed and built a SAMD21 development board with LoRa radio module and GPS receiver, that is available on GitHub: I’ve been doing some LoRa projects lately in order to learn as much as I can about this exciting new radio technology (see this LoRa mesh networking project and this LoRa weather station). ATmega328-based […]
Using the 433MHz RF Transmitter and Receiver with Arduino
https://www.electronics-lab.com/news/using-433mhz-rf-transmitter-receiver-arduino/
While building microcontroller based projects, there are occasions where communication will be required between two devices, either in a duplex/transceiver based operation (where both devices can transmit and receive at the same time) or in a simplex-based operation where communication is one way (Receiving device cannot transmit and the transmitting device cannot receive). Several options […]