Arduino Digital Capacitance Meter


https://www.electronics-lab.com/news/arduino-digital-capacitance-meter/

by braulio777 @ instructables.com This project lets you measure capacitors in an alone range of measure from 0.000pF to 1000uF. That is, a 16×2 LCD Display will be displaying a sole scale from 0.000pF to 1000uF whose main components will be an Arduino Uno and a 16X2 LCD Display. Arduino Digital Capacitance Meter – [Link]

Understanding bioelectricity


https://www.electronics-lab.com/news/understanding-bioelectricity/

by Maurizio @ dev.emcelettronica.com: Our body is built with biological tissue. The tissue that can generate or detect bioelectrical signals is called excitable tissue. Some examples of this tissue (and its cells) are: neurons and muscular tissue. Neurons are responsible of transmitting the excitatory bioelectrical signal to another neuron (forming nerves) or to a muscle tissue, […]

Teardown & analysis of a Keysight InfiniMax III N2802A 25GHz active probe


https://www.electronics-lab.com/news/teardown-analysis-of-a-keysight-infinimax-iii-n2802a-25ghz-active-probe-2/

A teardown & analysis of a Keysight InfiniMax III N2802A 25GHz active probe from TheSignal Path: In this episode Shahriar takes a close look at one of Keysight (Agilent) InfiniMax III active probes. The model N2802A offers 25GHz of analog bandwidth, 17.5pS of rise time and a total differential input capacitance of 32fF at 10k-Ohm […]

Sound to light effect


https://www.electronics-lab.com/news/sound-to-light-effect/

Audio Dancing LED project is a fun filled project which generates a LED dancing sequence depending on the audio level it senses.  This project is based on one of the VU Meter IC LB1403 or CA1403 Specifications Power supply input 6 to 9 VDC Output 5 LED’s Onboard preset to adjust audio level to the […]

Sound to Light Effect


https://www.electronics-lab.com/project/sound-to-light-effect/

Audio Dancing LED project is a fun filled project which generates a LED dancing sequence depending on the audio level it senses.  This project is based on one of the VU Meter IC LB1403 or CA1403 Specifications Power supply input 6 to 9 VDC Output 5 LED’s Onboard preset to adjust audio level to the […]

Arduino Motorized SMT Solder Paste Dispenser


https://www.electronics-lab.com/news/arduino-motorized-smt-solder-paste-dispenser/

by zapta @ thingiverse.com: This is a motorized solder paste dispenser for soldering SMT boards. The home directory of this project is on github here https://github.com/zapta/misc/tree/master/paste_injector and it include hardware and firmware design of a compatible controller board that is Arduino compatible (it looks to the Arduino IDE as an Arduino Pro Mini). Arduino Motorized SMT […]

SOS webinar – Simple and efficient solution for wide voltage range applications


https://www.electronics-lab.com/news/sos-webinar-simple-and-efficient-solution-for-wide-voltage-range-applications/

LINEAR TECHNOLOGY Term: 2015.11.25 10:00 – 11:30 CET Learn more about available topologies for input voltage higher and lower from output level. Focus on the most efficient way to convert power in four-switch buck-boost topology. available topologies of Vin min < Vout < Vin max and differences between them four-switch buck-boost topology as the most […]

Warning LED Flash Light


https://www.electronics-lab.com/news/warning-led-flash-light/

LED Flasher is a simple project producing a flashing effect of six LED’s.  This project can be used in all areas where you want to draw attention.  Hi-glow LED’s providing enough flashing light to attract your attention. Can be used as warning light. Specifications Supply input 12 V @ 35 mA (6 to 15V Dc […]

Warning LED Flash Light


https://www.electronics-lab.com/project/warning-led-flash-light/

LED Flasher is a simple project producing a flashing effect of six LED’s.  This project can be used in all areas where you want to draw attention.  Hi-glow LED’s providing enough flashing light to attract your attention. Can be used as warning light. Specifications Supply input 12 V @ 35 mA (6 to 15V Dc […]

Kicad StepUp – export kicad 3D board


https://www.electronics-lab.com/news/kicad-stepup-export-kicad-3d-board/

kicad StepUp allows exporting kicad 3D board and comps in STEP AP214 .By easyw @ sourceforge.net: kicad StepUp: a new approach to export kicad board and modules in STEP AP214 (with colors). With kicad StepUp, it is possible to work in kicad EDA with the same component model data available in the STEP AP214 3D format, […]