Have you tried Serial to Ethernet communication?


https://www.electronics-lab.com/news/have-you-tried-serial-to-ethernet-communication/

More than 50 developers tested Wiznet modules during Pizza workshops in Brno, Bratislava and Budapest. The main topic of Pizzaworkshop was Ethernet communication via Wiznet modules. Developers had a chance to test how fast and simple it is to connect the device to Ethernet and all of this was led by Joachim Wülbeck from Wiznet.Developers […]

DIY Infrared Remote Controls


https://www.electronics-lab.com/news/diy-infrared-remote-controls/

by Jason Poel Smith @ makezine.com: Halloween is the perfect opportunity to create fun special effects. When you want to be able to control props and effects remotely, one good option is to use an infrared remote control. In this project, I’ll show you some simple remote controlled effects that you can set up in your […]

Decoding and sending 433MHz RF codes with Arduino


https://www.electronics-lab.com/news/decoding-and-sending-433mhz-rf-codes-with-arduino/

by liwenyip @ instructables.com: In this tutorial I’ll show you how to use an Arduino to decode signals from RF remotes, and re-send them to remotely control some mains switches and a garage door. Decoding and sending 433MHz RF codes with Arduino – [Link]

T400 Temperature Datalogger Prototype


https://www.electronics-lab.com/news/t400-temperature-datalogger-prototype/

This is a walkthrough of the T400 prototype as of 2015-09-20. T400 Temperature Datalogger Prototype – [Link]

Building the Colossus LED Display


https://www.electronics-lab.com/news/building-the-colossus-led-display/

by Adam Haile @ maniacallabs.com: The 2014 NC Maker Faire was a huge turning point for Maniacal Labs. It was there that the idea for the AllPixel and what is now BiblioPixel got their start. It’s also where we showed off our first custom-built LED display, the 24×24 LPD8806 matrix. At nearly 24 inches square, […]

Arduino based MPPT solar charge controller


https://www.electronics-lab.com/news/arduino-based-mppt-solar-charge-controller/

by Abid Jamal @ electronicslovers.com: what is Mppt( Maximum power point tracking) ? “we use MPPT algorithm to get the maximum available power from the Photovoltaic module under certain conditions” How MPPT works ? Why 150W solar panel does not equal to 150 w? For example you bought a new solar panel from the market which puts […]

Multi Channel Datalogger with OLED Display


https://www.electronics-lab.com/news/multi-channel-datalogger-with-oled-display/

by Jed Hodson @ prototypingcorner.me: A 3 Channel Datalogger Powered by the LinkIt One. This device can log data from 2 Analog Inputs and 1 Digital Input / Output with PWM capabilities. The Device syncs time from GPS and makes use of the on-board battery to make it become even more portable. With an OLED Display […]

Teardown & Repair of a Stanford Research PS350 5000V, 25W High Voltage Power Supply


https://www.electronics-lab.com/news/teardown-repair-of-a-stanford-research-ps350-5000v-25w-high-voltage-power-supply/

In this episode Shahriar repairs a Stanford Research Systems Model PS350 5000V-25W High Voltage Power Supply. The unit continuously displays 2.5kV without the output being enabled and produces no output voltage. Verification of power supply voltages reveals the issue is linked to a disconnected 15V voltage regulator IC. After the repair, the output voltage is […]

Raspberry Pi 2 VS Orange Pi 2 VS BPi-M2


https://www.electronics-lab.com/news/raspberry-pi-2-vs-orange-pi-2-vs-bpi-m2/

In this VS episode “GreatScott” will compare the hardware (CPU, RAM, GPU,….), the software and community aspects of the three most powerful single board computers from the fruit companies. Raspberry Pi 2 VS Orange Pi 2 VS BPi-M2 – [Link]

Basic Types of Thyristors and Applications


https://www.electronics-lab.com/news/basic-types-of-thyristors-and-applications/

In this article we will discuss about the various types of thyristors. Thyristors are 2 pin to 4 pin semiconductor devices that act like switches. For example a 2 pin thyristor only conducts when the voltage across its pins exceeds the breakdown voltage of the device. For a 3 pin thyristor the current path is […]