Industruino – Arduino compatible industrial controller
https://www.electronics-lab.com/news/industruino-arduino-compatible-industrial-controller/
Industruino is a fully featured Arduino Leonardo compatible board housed in a DIN-rail mountable case + prototyping area + onboard LCD + membrane panel. With this product you will be able to permanently install your Arduino application in no-time. Whether you use it for automation projects, data loggers or an interactive art installation, Industruino offers […]
AC energy metering board using an Atmel 90E24 energy metering chip
https://www.electronics-lab.com/news/ac-energy-metering-board-using-an-atmel-90e24-energy-metering-chip/
Steve Rodgers writes: Here’s my latest project. Its an AC energy metering board using an Atmel 90E24 energy metering chip. The board can either take an ESP8266-12 and run a native C application, or the ESP8266-12 can be omitted, and an external microcontroller can be used to talk to the Atmel 90E24 energy metering chip. […]
Surface-mount device prototyping in education
https://www.electronics-lab.com/news/surface-mount-device-prototyping-in-education/
In this article Vassilis K. Papanikolaou explains how SMD prototyping practice can be used in learning environments using simple and wide available tools and equipment: A feasibility study is herein attempted, towards the adaptation of modern surface-mount device (SMD) prototyping practice to learning environments. This necessity emerges not only from the profound advantages of the […]
MC34VR500V1ES Multi-Output DC/DC Regulator
https://www.electronics-lab.com/news/mc34vr500v1es-multi-output-dcdc-regulator/
The circuit in this reference design features the capability of MC34VR500V1ES to supply multiple DC voltage outputs. This device is designed to support the LS1/T1 family of communication processors, which require efficient and precise level of voltage supplies. With its four switching and five linear regulators, the MC34VR500V1ES can supply power to the whole system, […]
DIY Miniature and Wearable Electronics
https://www.electronics-lab.com/news/diy-miniature-and-wearable-electronics/
MiniWear – DIY Miniature And Wearable Modules That Can Be Worn Anywhere On The Body. James Cannan writes: We love electronics, especially Wearables, and that is why we have made super cool modules that include heart rate detection, movement, non contact temperature sensing, and ultraviolet (UV), infra-red (IR), and light sensing technology. We are also one […]
NE555 timer sparks low-cost voltage-to-frequency converter
https://www.electronics-lab.com/news/ne555-timer-sparks-low-cost-voltage-to-frequency-converter/
by Gyula Dioszegi @ edn.com: In 1971, Signetics—later Philips—introduced the NE555 timer, and manufacturers are still producing more than 1 billion of them a year. By adding a few components to the NE555, you can build a simple voltage-to-frequency converter for less than 50 cents. The circuit contains a Miller integrator based on a TL071 along […]
JFET Moving Coil (MC) Pre-Preamp Kit
https://www.electronics-lab.com/news/jfet-moving-coil-mc-pre-preamp-kit/
by Mark Houston @ diyaudioprojects.com: I received the Boozhound Labs JFET Moving Coil (MC) Pre-Preamp Kit a while back and I promptly assembled the small circuit board. I’m a sucker for a simple kit and a hot iron. That is where it all stopped. The circuit board remained complete and laying about for a few years. Recently […]
Miniscope v2f
https://www.electronics-lab.com/news/miniscope-v2f/
Here is another variant (after miniscope v2a, b, c, d, e) of simple PC/USB oscilloscope/recorder: http://tomeko.net/miniscope_v2f/ It extends miniscope v2e with PGA (MCP6S21) offering same sampling frequency (480 ksps, 8 bit real time streaming to PC allowing continuous recording up to 512M samples) but 8 gain ranges and high input impedance. Estimated price is $6 […]
WiFi-based Weather Forecast and Clock
https://www.electronics-lab.com/news/wifi-based-weather-forecast-and-clock/
by soniktech.com: This project is a stopgap on my way to building a ground-up “Internet of Things” base design around the ESP8266 SoC WiFi solution. I started by taking a few nixie tubes I’ve had lying around from a past project, and connecting them to a Nixie Power supply I found on ebay. After making […]
Attiny45 EMF Sensor
https://www.electronics-lab.com/news/attiny45-emf-sensor/
by Khaleel123 @ instructables.com: This sensor is very sensitive and can pick up electrical signals from anything that uses power. It displays the amount of interference it picks up by sequentially lighting 4 led’s one after the other. I have tested it all around the house and its been kinda fun to see how different things […]