National Instruments VirtualBench Review, Teardown & Experiments
https://www.electronics-lab.com/news/national-instruments-virtualbench-review-teardown-experiments/
In this episode Shahriar gets a hold of a National Instruments VirtualBench! This instrument combines a mixed-signal oscilloscope, function generator, digital multimeter, programmable power supply and digital I/Os in one compact and portable unit. The teardown of the unit reveals a two-board construction with a core single processor which handles all instrument functionality simultaneously. The […]
DIY Smart Plant pot
https://www.electronics-lab.com/news/diy-smart-plant-pot/
by Akin Yildiz @ instructables.com: it was one year ago that i have published the plant pot – world’s first stand alone smart plant pot that can email you when it’s thirsty, cold, hot, sleeping etc. a lot has changed since the first release. today I would like to share with you our latest and most […]
Specan – A reboot of the W7ZOI/K7TAU spectrum analyzer
https://www.electronics-lab.com/news/specan-a-reboot-of-the-w7zoik7tau-spectrum-analyzer/
An easy to build spectrum analyzer for the homebrewers. Specan – A reboot of the W7ZOI/K7TAU spectrum analyzer – [Link]
Analog to Digital Converter module
https://www.electronics-lab.com/news/analog-to-digital-converter-module/
This simple A2D (Analog to Digital) Converter Board can log upto 8 channel of analog signal with 8 bit resolution. This board uses the ADC0808 chip from National Semiconductor. Analog to Digital Converter module – [Link]
0-20V Bargraph Voltmeter
https://www.electronics-lab.com/news/0-20v-bargraph-voltmeter/
0 – 20V LED Voltmeter kit displays the voltage of the source using 20 LED’s. This projects is based on the famous LM3914 IC from National Semiconductor. Power Supply Input: 5 VDC Max @ 30 mA in DOT mode and 300 mA in BAR mode 0-20V Bargraph Voltmeter – [Link]
0-20V Bargraph Voltmeter
https://www.electronics-lab.com/project/0-20v-bargraph-voltmeter/
0 – 20V LED Voltmeter kit displays the voltage of the source using 20 LED’s. This projects is based on the famous LM3914 IC from National Semiconductor. Power Supply Input: 5 VDC Max @ 30 mA in DOT mode and 300 mA in BAR mode Specifications Output: 20 LED’s Range selectable with onboard preset 2 […]
Riverdi TFT display with FT801 controller
https://www.electronics-lab.com/news/riverdi-tft-display-with-ft801-controller/
If you are looking for a touchscreen LCD display for your next project you should take a look at Riverdi LCD solutions. Their aim is to produce innovative, high quality LCD solutions at affordable prices. They were kind enough to send us a sample of a FTDI FT801 controller LCD display along with their […]
Therm: a Tiny PID Controller
https://www.electronics-lab.com/news/therm-a-tiny-pid-controller/
by Ethan Zonca @ protofusion.org: Therm is a very small PID controller with an OLED display, thermocouple interface, and USB port. It can switch an external solid-state relay for driving large loads, or a transistor for driving small loads. When attached to a computer, it enumerates as a USB serial port for easy control and logging […]
Visaton Exciter – an exciting loudspeaker
https://www.electronics-lab.com/news/visaton-exciter-an-exciting-loudspeaker/
A loudspeaker without a membrane which can be mounted on any flat surface solves aesthetical and technical problems. Fans of HiFi sound and similar „audiophils“ usually don´t cover their loudspakers and surely not their membranes. Firstly, to cover a beautiful top-class loudspeaker is almost a sin 🙂 and naturally all that stands in a way […]
PCA9550 LED Driver With Programmable Blink Rates
https://www.electronics-lab.com/news/pca9550-led-driver-with-programmable-blink-rates/
This project introduces the use of PCA9550, an LED driver that causes the 2 LEDs to ON/OFF or in a flashing state at programmable rate. It has 2 selectable, fully programmable blink rates between 0.172Hz and 44Hz or 5.82 seconds and 0.023 second respectively. Its internal oscillator does not require external components and I2c bus […]