DFRobot Non-contact Flexible Liquid Level Sensor
https://www.electronics-lab.com/dfrobot-non-contact-flexible-liquid-level-sensor/
DFRobot Non-contact Flexible Liquid Level Sensor uses a flexible substrate with a light and thin design. With temperature-resistant and waterproof 3M adhesive tape on the back, it can be easily attached on surfaces of any kind of non-conductive container whose thickness is less than 5mm. The sensor outputs digital high/low level (low when liquid detected) […]
Raspberry Pi Ramps Up The Production of RP2040, Beats the Chip Shortage
https://www.electronics-lab.com/raspberry-pi-ramps-up-the-production-of-rp2040-beats-the-chip-shortage/
Eben Upton, Founder and Chief Executive Officer of one of the very famous and successful embedded electronic hardware manufacturers, Raspberry Pi, has published news on January 17, 2022, aiming to beat the semiconductor chip shortage by introducing a dedicated Raspberry Pi store to purchase RPi’s inhouse silicon tape out RP2040 at a very low-cost. Due […]
Wappsto:bit GO – An ESP32 Based, BBC Micro:bit Compatible IoT Board
https://www.electronics-lab.com/wappstobit-go-an-esp32-based-bbc-microbit-compatible-iot-board/
As IoT technology continues to find widespread applications, manufacturers continue to develop various development boards, with different capabilities and features, to make prototyping faster, and improve the time to market for IoT products. One of such boards is the Wappsto:bit GO recently launched on Crowd Supply by Denmark-based electronics manufacturer Seluxit. The ESP32 based board, […]
Sipeed Introduces Tang Nano 9K FPGA board, Compatible with RISC-V softcore PicoRV
https://www.electronics-lab.com/sipeed-introduces-tang-nano-9k-fpga-board-compatible-with-risc-v-softcore-picorv/
Sipeed has surprisingly introduced yet another Tang Nano FPGA board based on the Gowin GW1NR-9 chip. This time, the manufacturer has pushed the limits to around 9K (8640) logic units (LUT4), unlike the predecessor Tang Nano 1K and Tang Nano 4K with around 1152 and 4608 LUTs respectively. Despite the hardcore Arm Cortex-M3 processor embedded […]
PiGear Nano – A Nano-ITX (12x12cm), Raspberry Pi CM4 Carrier Board Designed for Industrial Applications
https://www.electronics-lab.com/pigear-nano-a-nano-itx-12x12cm-raspberry-pi-cm4-carrier-board-designed-for-industrial-applications/
Dutch Company; UUGear has announced the release of its newest product in the year; the PiGear Nano – a Nano-ITX carrier board for Raspberry Pi compute module 4, designed specifically for industrial use while still maintaining functionalities for DIY, gaming console and small computer applications. Designed to work with all models of the Raspberry Pi […]
ROHM’s New Ultra-High Efficiency Battery Management Solution Evaluation Board for Thin, Compact IoT Devices
https://www.electronics-lab.com/rohms-new-ultra-high-efficiency-battery-management-solution-evaluation-board-for-thin-compact-iot-devices/
Nano Energy™ power supply IC contributes to longer operation in IoT devices ROHM announced the availability of a new evaluation board: the REFLVBMS001-EVK-001 it facilitates the verification of the operation of ultra-efficient battery management solutions for the expanding IoT field. Recent years have seen the proliferation of battery-driven electronic devices, including wearables, industrial IoT such […]
Texas Instruments TMP114 Digital Temperature Sensor
https://www.electronics-lab.com/texas-instruments-tmp114-digital-temperature-sensor/
Texas Instruments TMP114 Digital Temperature Sensor is a high accuracy, I2C-compatible digital temperature sensor in an ultra-thin (0.15mm) 4-pin package. The small size and low height of the TMP114 optimize volume-constrained systems and enables novel placement of the sensor under other surface mount components for fast and accurate temperature measurement. The Texas Instruments TMP114 has […]
Texas Instruments TMAG5231 Low-Power Hall Effect Switch
https://www.electronics-lab.com/texas-instruments-tmag5231-low-power-hall-effect-switch/
Texas Instruments TMAG5231 Low-Power Hall Effect Switch is specifically designed to optimize the total system cost for compact, battery-operated consumer and industrial applications. The device outputs a low voltage when the applied magnetic flux density exceeds the operating point (BOP) threshold. The output stays low until the flux density decreases to less than the release […]
Monolithic Power Systems (MPS) MPQ811x High-Side Current-Sense Amplifiers
https://www.electronics-lab.com/monolithic-power-systems-mps-mpq811x-high-side-current-sense-amplifiers/
Monolithic Power Systems (MPS) MPQ811x High-Side Current-Sense Amplifiers are ideal for automotive systems, industrial supplies, and systems where battery/DC monitoring is critical. High-side current monitoring is beneficial in battery-powered systems since it does not interfere with the ground path of the battery charger. The low-cost, unipolar, high-side current-sense amplifiers operate from a 2.7V to 60V […]
Toshiba TCK207AN Load Switch IC
https://www.electronics-lab.com/toshiba-tck207an-load-switch-ic/
Toshiba TCK207AN Load Switch IC offers a 0.75V ultra-low voltage with a slew rate control driver and reverses the current blocking (SW OFF state) function. The TCK207AN is ideal for power management and portable applications that require high-density board assembly such as SSD, HDD, cellular phone. The Toshiba TCK207AN Load Switch IC supports a switch […]