Edatech’s Raspberry Pi CM4 Nano Industrial Computer Starting at $113
https://www.electronics-lab.com/edatechs-raspberry-pi-cm4-nano-industrial-computer-starting-at-113/
Raspberry Pi Compute Module 4 has been one of the most popular hardware from the manufacturer with its ever-increasing carrier boards. Chinese embedded electronic device manufacturer Edatech has released a new industrial box, CM4 Nano, built around the Raspberry Pi Compute Module 4 featuring compatibility with the Raspberry Pi 4B for industrial automation applications. The […]
Adafruit Unveils ESP32-C3 RISC V Developer Board For IoT Projects
https://www.electronics-lab.com/adafruit-unveils-esp32-c3-risc-v-developer-board-for-iot-projects/
Espressif introduced the ESP32-C3-WROOM-02 system-on-chip past year with options between the onboard PCB antenna and the external antenna connector. Adafruit has taken the lead to unveil an ESP32-C3 based developer board supporting Wi-Fi and Bluetooth Low-Energy wireless communication. As an entry-level RISC-V development board, hardware is an ideal choice for a wide range of applications, […]
Pintry-X2 – a Raspberry Pi CM4 Based NAS Device With Support for Up to 2 Drives
https://www.electronics-lab.com/pintry-x2-a-raspberry-pi-cm4-based-nas-device-with-support-for-up-to-2-drives/
Storage requires critical consideration when building a data management and network project, especially to manage unexpected network growth. This is the reason behind the Pintry-X2 – Network Attached Storage (NAS), released by hardware Engineer Cezar Chirila to help network engineers handle the enormous storage demand of network projects with extra drives. The two-bay NAS, Pintry-X2 […]
X-Sense Wireless Interconnected Combination Smoke and Carbon Monoxide Detector Review
https://www.electronics-lab.com/x-sense-wireless-interconnected-combination-smoke-and-carbon-monoxide-detector-review/
Introduction Quality of air in enclosed places, especially homes are in recent times, thankfully, becoming a prominent source of concern because of its severe health implications, and several home automation and safety companies are stepping up to the plate, developing smart and ingenious sensors that help detect an increase in the level of different pollutants, […]
DC-HV DC Converter – 200V @ 20mA Output with 12V DC Input
https://www.electronics-lab.com/project/dc-hv-dc-converter-200v-20ma-output-with-12v-dc-input/
This is a low-cost DC-HV DC converter built using TL3843 Low-Power Current-Mode PWM Controller from TI. Screw terminal connectors are provided for input and output, onboard LED D1 indicates the input supply. The project provides 200V DC @ 20mA output from 12V DC supply input. Features Operating Power Supply 12V DC @ 1A (Range 10V […]
Dual 40W Audio Power Amplifier with Mute
https://www.electronics-lab.com/dual-40w-audio-power-amplifier-with-mute/
The stereo audio amplifier project shown here is capable of delivering typically 40W per channel continuous average output power into an 8Ω load with less than 0.1% (THD+N). The project is built using an LM4766 chip from Texas Instruments, The performance of the LM4766, utilizing its Self-Peak Instantaneous Temperature (°Ke) (Spike) Protection Circuitry, places it […]
Under Speed Warning Alarm for Magnetic Pickup sensor – Frequency Controlled Switch
https://www.electronics-lab.com/under-speed-warning-alarm-for-magnetic-pickup-sensor-frequency-controlled-switch/
This is an under-speed sensor module that provides an audible warning and signals output when the speed of a machine is below the set point. The module can be used in applications such as Engines, Machines, Sports machines, Fitness Equipment, Speed of the machine or engine can be detected using a magnetic pickup sensor. The […]
DC Motor Controller using Relay and MOSFET – Arduino Interface
https://www.electronics-lab.com/dc-motor-controller-using-relay-and-mosfet-arduino-interface/
The project presented here is a low-cost solution to control high-power brushed DC motor speed and direction. Traditional DC motor controllers are based on solid-state circuitry known as H-Bridge. Here we have made an H-bridge configuration using high current 2 x relays which can handle high voltage as well as high current. Additional MOSFETs are […]
Low-Cost DC Motor Direction Controller with Fast Brake using 2 Relays
https://www.electronics-lab.com/low-cost-dc-motor-direction-controller-with-fast-brake-using-2-relays/
The project presented here is a low-cost easy to use DC brushed motor direction controller with fast-brake, the project was built using two 12V Relays, 2 x BJT transistors, and 2 x tactile switches. The two LEDs are provided to display the motor direction, 2 tactile switch controls the direction of the motor. Low-Cost DC […]
Multiple Output Power Source – Dual 10V (+/-10V), 5V DC, 3.3V DC from 9V Battery
https://www.electronics-lab.com/multiple-output-power-source-dual-10v-10v-5v-dc-3-3v-dc-from-9v-battery/
This is a multiple output power converter module that provides +/-10V (Dual 10V), 5V DC, and 3.3V DC from a 9V PP3 battery. This is a very useful project that has been designed for low-load current applications. Dual +/-10V output from a 9V battery is a key feature of the project. The battery holder can […]