20 Non-Contact Infrared Reflective Sensor for Line Follower Robots
https://www.electronics-lab.com/project/20-non-contact-infrared-reflective-sensor-line-follower-robots/
This project consists of 20 non-contact infrared reflective sensors and each sensor provides an analog output. QRD114 sensor is the heart of the project which includes Infrared LED and photosensor. The output of each sensor is high and goes low as objects or lines detected. The analog output voltage is proportional to IR reflected […]
New Arduino-compatible Music Visualizer board based on ATmega328p-au makes music really beautiful
https://www.electronics-lab.com/news/new-arduino-compatible-music-visualizer-board-based-atmega328p-au-makes-music-really-beautiful/
Music and Electronics end up beautifully when they are perfectly combined: if you are looking for a way to synchronize RGB LEDs to music, then you have a new tool in your hands. After releasing a detailed DIY report on how to create a music visualizer with an Arduino Uno and a Sparkfun Spectrum Shield, […]
AAEON BOXER-8120AI: AI Monitoring for Fever and PPE Compliance
https://www.electronics-lab.com/news/aaeon-boxer-8120ai-ai-monitoring-fever-ppe-compliance/
In light of the ongoing pandemic, nations around the world are putting into place various practices to help curtail the spread of COVID-19. One common rule among these is the requirement to wear masks or personal protective equipment (PPE) out in public, as well as barring anyone with a fever. However, observing large numbers of […]
Trinamic Introduces the TMCM-1617 Servo Controller Module
https://www.electronics-lab.com/news/trinamic-introduces-tmcm-1617-servo-controller-module/
TRINAMIC Motion Control GmbH & Co. KG announced the TMCM-1617 single-axis servo controller module designed for servo drives with 18A RMS and 8 to 28V DC supply voltage. Achieving high-current loop frequencies to minimize current ripple, the potted module enables smaller electric drives with high dynamics, according to the company. The TMCM-1617 also supports a […]
Saelig Introduces Aaronia AARTOS Drone/UAV Detection System
https://www.electronics-lab.com/news/saelig-introduces-aaronia-aartos-drone-uav-detection-system/
Customizable drone detection systems with 360deg coverage, wideband sensing to 20GHz, and AI software to avoid false alarms Saelig Company, Inc. has introduced the Aaronia AARTOS Drone Detection System, which can sense airborne drone activity with a virtually unlimited detection range. The AARTOS DDS monitors the entire frequency spectrum (e.g. 100MHz – 20GHz) hundreds of […]
Combat Covin-19, JLCPCB will be here with you!
https://www.electronics-lab.com/news/combat-covin-19-jlcpcb-will/
JLCPCB is a leading PCB Prototype company in China are attracting increasing people around the world to be our customer and at the same time, we also get much support from them to be the Better JLCPCB, especially during such a tough period due to COVID-19. 1. JLCPCB is in production JLCPCB tried all we […]
SparkFun launches SparkX Qwiic Compatible Board to Enable Stepper Motor Control
https://www.electronics-lab.com/news/sparkfun-launches-sparkx-qwiic-compatible-board-enable-stepper-motor-control/
SparkFun has announced another experimental SparkX board design, which enables higher motor control on a Qwiic-compatible I2C bus, with support for a built-in emergency stop button, and the capability to drive motors requiring up to 2A. The Qwiic Step is the latest of SparkFun’s entry in the SparkX board family, which are ranges of experimental […]
Seeed Launches an innovative All-in-one Grove Beginner Kit for Arduino
https://www.electronics-lab.com/news/seeed-launches-innovative-one-grove-beginner-kit-arduino/
Open-Source Hardware manufacturing super-power, Seeed Studio recently announced the launch of a new All-in-one Arduino Kit for Beginners. Designed for both learners and educators, the Grove beginner kit for Arduino aims to make learning Arduino programming fun and simple. According to Seeed, the new kit was designed to help beginners overcome some of the challenges […]
Driving multiple loads with 32 kHz Nano-Power MEMS oscillators
https://www.electronics-lab.com/news/driving-multiple-loads-32-khz-nano-power-mems-oscillators/
Driving multiple loads from a single oscillator output discussed in this app note from SiTime. Optimizing board space and managing power consumption of wearable devices is critical in sustaining competitiveness within this fast growing consumer segment. With less power consumed, battery life is extended or provides the option to reduce the battery size. MEMSbased reference […]
Ricoh Electronic Devices Company launches the RIOT-001 Environment Sensing Board
https://www.electronics-lab.com/news/ricoh-electronic-devices-company-launches-riot-001-environment-sensing-board/
Ricoh Electronic Devices Company RIOT-001 Environment Sensing Board is designed to transmit data obtained from a temperature/humidity/pressure sensor (BME280) and an ambient light sensor (MAX44009) via Bluetooth, to tablets or other smart devices. The board also includes a voltage regulator with a battery monitor (RP124) for the measurement of the secondary battery voltage. The RIOT-001 Board […]