TE0722 Zynq DIPFORTy1 “Soft Propeller” Module


https://www.electronics-lab.com/news/dipforty1-soft-propeller-fpga-board/

The DIPFORTy1 is a powerful Xilinx based FPGA board with small form factor and many programmable I/Os. It is popular for its high performance at most competitive price. Introduction: The TE0722 is based on the Xilinx Zynq-7000, a System on Chip. It contains a FPGA and a Dual Core ARM A9+ processor with enough logic […]

Turn your Zero Pi into a USB Dongle


https://www.electronics-lab.com/news/turn-zero-pi-usb-dongle/

The $5 Raspberry Pi Zero is a standalone computer that can be embedded in various applications, but maybe now it is time to add some extra features. It comes with a USB OTG port, meaning it can function as a USB device rather than a USB host. Thus, it can become a serial device with […]

Water Tank Overflow Alarm System Using ESP8266


https://www.electronics-lab.com/news/esp8266-overflow-alarm-system/

Sometimes the float valve of a water tank may not work properly causing water to overflow and spread across the floor. Peter Jennings faced this problem in his storage area, and he had developed an alarm device to notify him when the water exceeds its normal range. Peter’s project includes a simple water sensor and […]

Online prototyping with A/D simulation, in Infineon Designer


https://www.electronics-lab.com/news/online-prototyping-ad-simulation-infineon-designer/

Infineon Technologies’ Infineon Designer, introduced at the 2016 electronica trade fair, is presented as the first online prototyping engine combining analogue and digital simulation functionalities in an internet application. By Graham Prophet@ edn.com: Requiring a web browser only, it is an aid to designers in selecting the right product for a defined application. Infineon Designer […]

LTM4643 – Ultrathin Quad μModule Regulator with Configurable 3A Output Array


https://www.electronics-lab.com/news/ltm4643-ultrathin-quad-%ce%bcmodule-regulator-configurable-3a-output-array/

Configurable as quad, triple, dual or single output, the LTM4643 quad output step-down µModule [micromodule] (power module) regulator deliver, respectively, 12A, 6A & 6A or 9A & 3A, or 4 x 3A from a 9 x 15 x 1.82 mm ultrathin LGA package. by Graham Prophet @ edn.com: This flexibility enables system designers to rely […]

DIY Arduino ProMini Data Logger


https://www.electronics-lab.com/news/diy-arduino-promini-data-logger/

Ed Mallon has details on his DIY ProMini data logger: Typical pro-mini loggers built with this design sleep at 0.25mA, before extra sensors are added. At that current draw, the logger should deliver approximately six months of operation on three brand new AA batteries with a 15min duty cycle; depending on sensor load. DIY Arduino […]

PWM Fan controller


https://www.electronics-lab.com/news/pwm-fan-controller/

Lucky Resistor has build a PWM fan controller using Arduino and DHT22 sesnsors. The fan controller described on this project page, controls one or more PWM controlled 12V PC fans. It uses the input from two precise DHT22 based temperature sensors. The MCU is an Arduino Uno, which is powered using a 12V power source. […]

How to Choose a Connector


https://www.electronics-lab.com/news/how-to-choose-a-connector/

Sanket Gupta @ octopart.com discuss on how to choose a connector. He writes: Continuing our series about choosing parts, inspired by the latest version of the Common Parts Library, let’s take a close look at how to find and select connectors. In this blog, we will explain all the different types of connectors, their merits and demerits, […]

Pressure sensors need as little as 0.9 V


https://www.electronics-lab.com/news/pressure-sensors-need-little-0-9-v/

Susan Nordyk@ edn.com: These micropower low-pressure sensors operate from a supply voltage of just 0.9 V to 1.8 V and are intended for use with noncorrosive, nonionic working fluids in such applications as medical devices and instrumentation, environmental controls, HVAC equipment, and portable devices. Pressure sensors need as little as 0.9 V – [Link]

Using OV7670 Camera Sensor With Arduino


https://www.electronics-lab.com/news/using-ov7670-camera-sensor-arduino/

Developing a hardware project became much easier thanks to the growing number of the various sensors and actuators modules, which give you the ability to shift your ideas into a wider range of applications. This tutorial presents the steps of how to use OV7670 Camera Sensor Module STM32 with Arduino. To follow the tutorial, you […]