Oscillators - Timers Projects
1Khz to 20Mhz Low Power Oscillator
This is a precision, low power oscillator that occupies very little space.
PWM Module with Dual Source/Sink Outputs using SG3525
SG3525 PWM module is a great tool for every hobbyist.
7-segment Mini Clock using PIC16F628A and DS1307 RTC
This is a minimal and small clock based on PIC16F628A microcontroller and DS1307 RTC IC.
DS1307 RTC SMD Module
The module based on DS1307, The DS1307 serial real-time clock (RTC) is a low-power, full binary-coded decimal (BCD) clock/calendar plus 56 bytes of NV SRAM.
DS1307 Real Time Clock Module
This project is a Real Time Clock based on SD1307 RTC Description RTC Add-On Board offers an easy way to interface a standard I2C RTC IC type DS1307, into your project.
Darkroom Timer v2.0A for PCB Exposure Box
PIC based automatic timer for a PCB exposure box This is an improved version of the Darkroom Timer originally created by Stan Ockers (1999).
MSF Radio Time Clock
Introduction The National Physics Laboratory broadcasts a time signal, previously known as the Rugby clock but now called “Time from NPL.” Its most commonly known as the MSF signal due to it originally being identified in Morse code those letters.
1 to 100 Seconds Timer
This project is a 1 to 100 Seconds Timer based on 555 IC Description This project is a timer project and build around popular 555 Timer IC, It can be used for all application required a delay of up to 100 Seconds.
Long Duration Timer
This project is a long duration timer based on 555 timer IC.
Pulse generator
Description Pulse Generator project will generate a frequency in up to 180 KHz which can form a good test gear project.
230V Blinking LED
Attention: This Circuit is using 230V that is lethal.
Adjustable High/Low Frequency Sine wave generator
Adjustable High/Low Frequency Sine wave generator, low distortion.