Adafruit Sparkle Motion – ESP32-S3-Based LED Controller with I2S Mic, 4 Outputs, USB-C PD, and WLED/xLights Support
https://www.electronics-lab.com/adafruit-sparkle-motion-esp32-s3-based-led-controller-with-i2s-mic-4-outputs-usb-c-pd-and-wled-xlights-support/
The Adafruit Sparkle Motion with wFL Antenna is an ESP32-based board designed for WLED and xLights smart LED projects. It uses the classic dual-core 240MHz Tensilica ESP32 module with 4MB flash, supporting Wi-Fi, Bluetooth LE, and Bluetooth Classic. The board is optimized for compatibility with WLED and supports various LED configurations from small wearable setups […]
Adafruit ESP32-S2 Feather with w.FL Antenna Features Native USB, STEMMA QT, and Low Power Mode
https://www.electronics-lab.com/adafruit-esp32-s2-feather-with-w-fl-antenna-features-native-usb-stemma-qt-and-low-power-mode/
The Adafruit ESP32-S2 Feather with w.FL antenna connector is a compact, Feather-shaped microcontroller designed for IoT projects, wearable electronics, and smart home applications. It features an ESP32-S2 240MHz Tensilica processor plus a RISC-V ultra-low-power coprocessor, 320kB of SRAM and 128kB cache with native USB support, allowing it to function as a keyboard, mouse, MIDI device, […]
Adafruit CH552 QT Py – A 8051 Powered Dev Board with RGB LED and STEMMA QT
https://www.electronics-lab.com/adafruit-ch552-qt-py-a-8051-powered-dev-board-with-rgb-led-and-stemma-qt/
Adafruit just announced Adafruit CH552 QT Py and this board ranks in the top part of my weird tech list. The MCU used in this is a WinChipHead (WCH) CH552 has an E8051 Core. with 16 kilobytes of flash memory but only about 1.25 kilobytes of RAM, and the most weird thing about this it has […]
Adafruit’s Trinkey is A Thumb-Drive-Sized Temperature and Humidity Sensor
https://www.electronics-lab.com/adafruits-trinkey-is-a-thumb-drive-sized-temperature-and-humidity-sensor/
Adafruit has recently added two new members to the Trinkey family, the Adafruit SHT45 Trinkey and the Adafruit SHT41 Trinkey both of those are designed to add temperature and humidity-sensing capabilities to any USB HOST device. The main difference between the two boards lies in their accuracy and cost. The SHT45 Trinkey offers higher precision, […]
ePulse Feather C6 – An ESP32-C6 Based Dev Board with WiFi, BLE, Zigbee, Thread & Matter Capabilities
https://www.electronics-lab.com/epulse-feather-c6-an-esp32-c6-based-dev-board-with-wifi-ble-zigbee-thread-matter-capabilities/
ThingPulse has recently released the ePulse Feather C6, an ESP32-C6-based development board with WiFi 6, BLE5, Zigbee, Thread, and Matter connectivity. In my personal opinion, the “Feather” came from the Adafruit Feather as this board resembles the Adafruit form factor. Additionally, it features a battery connector with a TP4065 charging IC and MAX17048 fuel gauge […]
Metro ESP32-S3 is The Next Generation IoT Board with Circuit Python Support
https://www.electronics-lab.com/adafruit-metro-esp32-includes-with-circuit-python-support/
The Adafruit Metro ESP32-S3 is a development board based on the ESP32-S3, designed in a form factor similar to an Arduino UNO or Adafruit Metro. The board features built-in Wi-Fi Bluetooth capabilities and can be programmed with Arduino or Circuit Python. The core of the board is an ESP32-S3 microcontroller, which includes a dual-core LX7 […]
Adafruit ATtiny1616 Breakout Board comes with Seesaw Firmware and STEMMA QT / Qwiic JST Connector
https://www.electronics-lab.com/adafruit-attiny1616-breakout-board-comes-with-seesaw-firmware-and-stemma-qt-qwiic-jst-connector/
Adafruit’s latest ATtiny1616-based breakout board is slightly more unique than the average breakout board you can commonly find in the market. Not only this board features the Seesaw Firmware, but it also features the STEMMA QT / Qwiic connector, through which you can use this board as a plug-and-play I2C controller or peripheral. So, why […]
Adafruit Feather RP2040: Another feather board but with a Raspberry Pi microcontroller
https://www.electronics-lab.com/adafruit-feather-rp2040-another-feather-board-but-with-a-raspberry-pi-microcontroller/
The Adafruit Feather RP2040 is an embedded device with the popular Feather form factor, designed to cater to the needs of long-range IoT wireless communication. At the heart of the Adafruit Feather RP2040 is the Raspberry Pi RP2040 microcontroller, which ensures high performance and low power. The famous Raspberry Pi RP2040 microcontroller boasts a dual-core […]
Adafruit Metro M7– An Arduino Uno layout board with wireless connectivity
https://www.electronics-lab.com/adafruit-metro-m7-an-arduino-uno-layout-board-with-wireless-connectivity/
Adafruit has recently unveiled its Adafruit Metro M7 board, which has an Arduino Uno layout and combines the added convenience of built-in wireless connectivity. With its features and robust hardware, the Metro M7 with AirLift offers a comprehensive platform for a wide range of projects, making it an ideal addition to Adafruit’s extensive lineup of […]
Adafruit Feather RP2040 with RFM95 LoRa
https://www.electronics-lab.com/adafruit-feather-rp2040-with-rfm95-lora/
The applications demand customizations when it comes to tweaking the use case according to the target requirements. Also, mobility becomes an important factor with the present necessity for usage from varied locations. As a solution, Adafruit tries to incorporate a great degree of portability and customizability with its Feather RP2040 microcontroller board or simply RadioFruit. […]