Particle Announces M-Series – Multi-Radio Connectivity Solutions with BLE, Wi-Fi, LoRa, and Satellite Support
https://www.electronics-lab.com/particle-announces-m-series-multi-radio-connectivity-solutions-with-ble-wi-fi-lora-and-satellite-support/
Particle recently launched their new M-Series devices, including M-SoM modules and their development boards. These modules are designed to cater to different needs, offering a variety of features to support quick prototyping. At the time of writing this series is built with three distinct modules and their dev boars: M-SoM LTE-M/2G + Wi-Fi (M404) for […]
LILYGO’s T-FPGA – An M.2-Formated Dev Board with ESP32-S3 and Gowin GW1NSR FPGA
https://www.electronics-lab.com/lilygos-t-fpga-an-m-2-formated-dev-board-with-esp32-s3-and-gowin-gw1nsr-fpga/
The LILYGO T-FPGA development kit consists of two components: an M.2 module and a carrier board. The M.2 module features an ESP32-S3 SoC and Gowin GW1NSR-4C FPGA with 4,608 LUTs along with USB-C OTG for ESP32-S3, a USB-C port for FPGA, four Pmod interfaces, a STEMMA Qt/Qwiic connector, pins for 3.3V and GND, and a […]
This Beetle ESP32-C6 Board from DFRobot Features Integrated Battery Charging for $4.90
https://www.electronics-lab.com/this-beetle-esp32-c6-board-from-dfrobot-features-integrated-battery-charging-for-4-90/
The Beetle ESP32-C6 Board is a tiny Arduino IoT board with an ESP32-C6 160MHz RISC-V processor, with support for Wi-Fi 6, Bluetooth 5, Zigbee 3.0, and Thread 1.3. It’s designed for Matter terminal devices and includes integrated battery charging, which makes it ideal for compact, wearable projects. Matter is a universal, open-source smart home standard […]
SparkFun Pro Micro – ESP32-C3 Features a Qwiic Connector
https://www.electronics-lab.com/sparkfun-pro-micro-esp32-c3-features-a-qwiic-connector/
SparkFun has recently announced the “SparkFun Pro Micro – ESP32-C3” board, an ESP32-C3-based development board featuring SparkFun’s Qwiic Connect System. This compact board includes Wi-Fi, Bluetooth, GPIO, SPI, UART, I2C, I2S, and all the necessary hardware required for advanced IoT and embedded applications. Previously we have covered many ESP32-C3-based development boards like the Wemos Lolin […]
Arduino and Silicon Labs Collaborate to Embed Matter Protocol into Arduino IDE
https://www.electronics-lab.com/arduino-and-silicon-labs-collaborate-to-embed-matter-protocol-into-arduino-ide/
Arduino and Silicon Labs are teaming up to make it easier to use the Matter protocol for IoT devices. This project will happen in two phases. The first phase, which took place at CES 2024, involved the release of a user-friendly Arduino library for the Matter protocol, along with a new core for SiLabs microcontrollers. […]
LILYGO T-Panel Combines ESP32-S3 and ESP32-H2 with A 4-inch HMI Display
https://www.electronics-lab.com/lilygo-t-panel-combines-esp32-s3-and-esp32-h2-with-a-4-inch-hmi-display/
The LILYGO T-Panel is a compact module that works as both a display and a control center for smart devices. It has a 4-inch screen and can connect to WiFi and Bluetooth. It also supports smart home standards like Zigbee, Thread, and Matter. Plus, it has options for adding more features. Last year, Espressif showed […]
Espressif Systems Releases ESP32-C61 A Wi-Fi 6 and Bluetooth 5 SoC for Superior IoT Performance
https://www.electronics-lab.com/espressif-systems-releases-esp32-c61-a-wi-fi-6-and-bluetooth-5-soc-for-superior-iot-performance/
Espressif Systems recently launched the ESP32-C61, an advanced System-on-Chip (SoC) with Wi-Fi 6 and Bluetooth 5 (LE). Building on its predecessors like ESP32-C2 and ESP32-C3, it shares similar specifications but adds support for BLE Mesh 1.1 protocol and faster Quad SPI PSRAM, operating at speeds up to 120MHz. The ESP32-C61, a 32-bit single-core RISC-V microcontroller, […]
The FireBeetle 2 ESP32-C6 IoT Development Board with Wi-Fi 6, Bluetooth 5, Solar-Powered Support
https://www.electronics-lab.com/the-firebeetle-2-esp32-c6-iot-development-board-with-wi-fi-6-bluetooth-5-solar-powered-support/
The FireBeetle 2 ESP32-C6 is a compact and energy-efficient IoT development board that features the ESP32-C6 microcontroller and supports advanced connectivity options like Wi-Fi 6, Bluetooth 5, Zigbee 3.0, and Thread 1.3. Solar-powered charging and Target Wake Time technology for low power consumption are ideal for smart home automation, air quality, and soil monitoring projects. […]
Arduino UNO R4: Revamped Performance, Enhanced Features, and Seamless Compatibility
https://www.electronics-lab.com/arduino-uno-r4-revealed-revamped-performance-enhanced-features-and-seamless-compatibility/
Arduino has collaborated with Renesas and Espressif to unveil the latest addition to its UNO family—the UNO R4. This new iteration boasts a remarkable 3x performance enhancement over the UNO R3 and is available in standard and Wi-Fi versions. The UNO R4 is offered in two variants: UNO R4 Wi-Fi and UNO R4 Minima. It […]
The ZSWatch: A Stylish and Functional DIY Smartwatch for the Modern User
https://www.electronics-lab.com/the-zswatch-a-stylish-and-functional-diy-smartwatch-for-the-modern-user/
Smartwatches allow you to stay connected and receive notifications without having to pull out your phone. Also, these watches come with built-in fitness tracking features that allow users to monitor activity levels, and workouts and set fitness goals. The ZSWatch is the ultimate smartwatch solution for fitness and productivity. This watch has all health and […]