R1810 Boost DC/DC Converter is an energy harvesting solution
https://www.electronics-lab.com/r1810-boost-dc-dc-converter-is-an-energy-harvesting-solution/
The R1810 Boost DC/DC Converter is an energy harvesting solution designed for powering low current consuming IoT devices by extracting energy from Photovoltaic cells. Target applications include wireless sensors, home and building automation, remote monitoring, presence detection, industrial equipment controls and more. Tailored specifically to replace the conventional batteries with power supplies operate with photovoltaic cells, […]
LTC7818 – 40V, Low IQ, 3MHz, Triple Output Buck/Buck/Boost Synchronous Controller
https://www.electronics-lab.com/ltc7818-40v-low-iq-3mhz-triple-output-buck-buck-boost-synchronous-controller/
Analog Devices LTC7818 Triple Output Synchronous Controllers are high-performance synchronous DC/DC switching regulator controllers that drive all N-channel power MOSFET stages. Its constant frequency current mode architecture allows a phase-lockable switching frequency of up to 3MHz. The LTC7818 operates from a wide 4.5V to 40V input supply range. When biased from the output of the […]
TINY DC-DC Power Module – Input 8-28V DC – Output 5V DC 1A
https://www.electronics-lab.com/tiny-dc-dc-power-module-input-8-28v-dc-output-5v-dc-1a/
This tiny power module is an easy-to-use integrated power solution that combines a 3A DC/DC converter chip with inbuilt power MOSFETs, an inductor, and passives into a 3-pin, through-hole package. The standard TO-220 pin-out allows a much-improved replacement of linear regulators packaged in this industry-standard footprint. The circuit provides much higher efficiency and output current […]
TPSM82810 – 2.75-V to 6-V, 4-A step-down module with adjustable-frequency & tracking
https://www.electronics-lab.com/tpsm82810-2-75-v-to-6-v-4-a-step-down-module-with-adjustable-frequency-tracking/
TPSM8281x is a family of pin-to-pin 3-A and 4-A compatible high efficiency and easy to use synchronous step-down DC/DC power modules with integrated inductors. They are based on a fixed-frequency peak current-mode control topology. They are used in telecommunication, test and measurement, and medical applications with high power density and ease of use requirements. Low […]
New UltraBK DC/DC Converters Feature Two-Stage Design
https://www.electronics-lab.com/new-ultrabk-dc-dc-converters-feature-two-stage-design/
Fully Integrated DC/DC Converters from Murata Feature Patented Ultra-Compact, High-Efficiency Design Leveraging a multi-patented design that significantly reduces the footprint and height of power-conversion circuitry, Murata has introduced the UltraBK™ family of compact, low-profile, fully-integrated DC/DC converters. The UltraBK™ converters are aimed at space-constrained applications such as IT and network infrastructure equipment. In addition to […]
TI Release TPS62912, TPS62913 family of low-noise DC/DC Switching Regulators
https://www.electronics-lab.com/ti-release-tps62912-tps62913-family-of-low-noise-dc-dc-switching-regulators/
Texas Instruments released the TPS62912 and TPS62913 family of low-noise DC/DC switching regulators with integrated ferrite-bead compensation. They offer low noise of 20 µVRMS for frequencies ranging from 100 Hz to 100 kHz and ultra-low output-voltage ripple of 10 µVRMS. Traditional low-noise power supply architectures include such technology like DC/DC converters, low-noise LDO, and an […]
MPM54304 DC/DC Stepdown Power Module
https://www.electronics-lab.com/mpm54304-dc-dc-stepdown-power-module/
MPS’ quad-output, DC/DC stepdown power module features up to 2 A and 3 A per output Monolithic Power Systems’ MPM54304 is a complete power management module that integrates four high-efficiency step-down DC/DC converters, inductors, and a flexible logic interface. This COT control DC/DC converter provides a fast transient response. Its default 1.5 MHz switching frequency […]
BMR481 48 V-to-Load Direct Conversion DC/DC Converters
https://www.electronics-lab.com/bmr481-48-v-load-direct-conversion-dc-dc-converters/
Flex Power Modules’ converters are first generation direct conversion products Flex Power Modules’ BMR481 DC/DC converter addresses the growing need for higher energy efficiency levels in datacenters and cloud computing infrastructures. This converter offers an input range of 40 V to 60 V targeting 48 V to 54 V nominal supplies and a programmable 0.5 V to 1.35 V output. The […]
LT8228 – 100 V Bidirectional Buck or Boost DC/DC Controllers with Protection
https://www.electronics-lab.com/lt8228-100-v-bidirectional-buck-boost-dc-dc-controllers-protection/
Analog Devices’ controllers enable full functional safety if one of the batteries fail by forcing the other battery to take over Analog Devices’ LT8228 100 V bidirectional buck or boost DC/DC controllers provide sustainable power in hybrid and electric vehicle (EV) critical non-drive train subsystems by controlling 48 V and 12 V batteries with bidirectional […]
Analog Devices Introduces Quad-Output DC/DC µModule Regulators
https://www.electronics-lab.com/analog-devices-introduces-quad-output-dc-dc-%c2%b5module-regulators/
Analog Devices, Inc., has introduced the LTM4668 and LTM4668A µModule® regulators, quad-output DC/DC regulators with up to 4.8A output capability. The new devices integrate switching controllers, power FETs, inductors and support components, easing the design process while reducing power consumption and board space. They are ideal for telecom, networking and industrial applications. Operating over an […]