Raspberry Pi RP2350-based W6300-EVB-Pico2 Ethernet board supoprts 80+ Mbps data rates thanks to WIZnet W6300 QSPI Ethernet
https://www.electronics-lab.com/raspberry-pi-rp2350-based-w6300-evb-pico2-ethernet-board-supoprts-80-mbps-data-rates-thanks-to-wiznet-w6300-qspi-ethernet/
WIZnet has recently introduced the W6300-EVB-Pico2, a Raspberry Pi RP2350-based Ethernet board featuring the new W6300 QSPI Ethernet controller, designed to achieve Ethernet data rates exceeding 80 Mbps. Designed for applications that need higher-speed wired Ethernet connectivity with low MCU overhead. This can now be achieved thanks to its built-in TCP/IP Offload Engine (TOE). The […]
Nordic Semiconductor Launches nPM2100 Evaluation Kit for Ultra-Low Power Primary-Cell Applications
https://www.electronics-lab.com/nordic-semiconductor-launches-npm2100-evaluation-kit-for-ultra-low-power-primary-cell-applications/
Nordic Semiconductor has announced the launch of an evaluation kit for the company’s nPM2100 power management integrated circuit (PMIC) to boost battery life in low-power designs by optimizing power efficiency and system performance. The new power management chip features a very low-power hibernation mode that uses less than 200nA, built-in safety systems called watchdogs, and […]
P42 Pico2 M.2: Raspberry Pi RP2350A Development Board with M.2 A/E-Key Interface and Optional RISC-V Hazard3 Core
https://www.electronics-lab.com/p42-pico2-m-2-raspberry-pi-rp2350a-development-board-with-m-2-a-e-key-interface-and-optional-risc-v-hazard3-core/
The P42 Pico2 M.2 may look like an M.2 module, but it’s actually a Raspberry Pi RP2350 development board in M.2 3024 form factor. The M.2 interface has USB, UART, I2C, and control IO [Input/Output] connectivity. Adding an RP2350 microcontroller, the P42 Pico2 M.2 pops a Raspberry Pi’s second-generation in-house microcontroller design into any A-key […]
LILYGO T-Deck Pro: ESP32-S3 e-Paper Development Board with 4G and Voice Options
https://www.electronics-lab.com/lilygo-t-deck-pro-esp32-s3-e-paper-development-board-with-4g-and-voice-options/
LILYGO has released the T-Deck Pro, an open-source, feature-phone-form-factor, all-in-one ESP32-S3-based development board. It includes a 3.1-inch 320 x 240 ESP32-S3 e-paper IPS touchscreen LCD, a built-in BlackBerry-style QWERTY keyboard, GPS module, speaker, microphone, 3.5mm audio jack, and integrated IMU and light sensors. With sensors onboard and touchscreen support, the board is suitable for IoT […]
LILYGO T3-S3 MVSR is A ESP32-S3 LoRa voice communication board with mic, speaker, and OLED
https://www.electronics-lab.com/lilygo-t3-s3-mvsr-is-a-esp32-s3-lora-voice-communication-board-with-mic-speaker-and-oled/
The T3-S3 MVSR by LILYGO is a compact LoRa voice communication kit designed for long-range audio transmission using LoRa technology. It features a built-in vibration motor, speaker (MAX98357A), microphone (MSM261S4030HOR), and a 0.96-inch OLED display with a resolution of 128×64, driven by the SSD1306 I2C interface. At its core, it is powered by the ESP32-S3FH4R2 […]
Luckfox Nova Embedded Development Board Features Rockchip RK3308B SoC with 8-Channel Audio and PoE/Wi-Fi Options
https://www.electronics-lab.com/luckfox-nova-embedded-development-board-features-rockchip-rk3308b-soc-with-8-channel-audio-and-poe-wi-fi-options/
The Luckfox Nova is an embedded development board powered by the Rockchip RK3308B processor. This SoC features a 64-bit quad-core ARM Cortex-A35 CPU running at up to 1.3GHz, designed for smart voice interaction, audio signal processing, and multimedia applications. It integrates a high-performance Audio Codec and Voice Activity Detection (VAD) module for low-power voice wake-up […]
Makerdiary nRF9151 Connect Kit Brings IoT Dev Board with LTE-M, DECT NR+, GNSS to Developers
https://www.electronics-lab.com/makerdiary-nrf9151-connect-kit-brings-iot-dev-board-with-lte-m-dect-nr-gnss-to-developers/
Makerdiary has recently introduced the nRF9151 Connect Kit, a rapid prototyping kit designed for Cellular IoT applications, featuring LTE-M/NB-IoT, DECT NR+, and GNSS connectivity. Built around the nRF9151 SiP with a 64 MHz Arm Cortex-M33, 1 MB Flash, and 256 KB RAM, it supports secure processing with Arm TrustZone and CryptoCell. The board includes an […]
Forlinx FET3506J-S SoM and OK3506J-S Carrier Board Feature Rockchip RK3506J SoC for Industrial Applications
https://www.electronics-lab.com/forlinx-fet3506j-s-som-and-ok3506j-s-carrier-board-feature-rockchip-rk3506j-soc-for-industrial-applications/
Forlinx Embedded’s FET3506J-S System on Module (SoM) features the Rockchip RK3506J, an industrial-grade tri-core Cortex-A7 SoC designed for smart industrial applications. It operates at low power consumption of approximately 0.7W and can withstand temperatures up to +85°C at full load without additional heat dissipation. Originally introduced in 2023 through a product roadmap, the Rockchip RK3506 […]
Waveshare ESP32-P4-Module Development Board Supports WiFi 6, Bluetooth 5, DSI Display, and Ethernet
https://www.electronics-lab.com/waveshare-esp32-p4-module-development-board-supports-wifi-6-bluetooth-5-dsi-display-and-ethernet/
If you’re into building advanced IoT or embedded systems, the ESP32-P4-Module Development Board might just be what you need. It’s built on the ESP32-P4 with an integrated ESP32-C6, meaning it supports the latest Wi-Fi 6 and Bluetooth 5/BLE over an SDIO 3.0 interface—super handy for fast and reliable wireless connections. A wide range of interfaces, […]
Alchitry Au V2: Xilinx Artix-7 FPGA Development Board with Expandable I/O and High-Speed Memory
https://www.electronics-lab.com/alchitry-au-v2-xilinx-artix-7-fpga-development-board-with-expandable-i-o-and-high-speed-memory/
The Alchitry Au V2 is a powerful FPGA development board, often considered the “gold” standard in its category. FPGAs (Field-Programmable Gate Arrays) offer engineers and hobbyists a way to take electronics programming to the next level. The Au V2 continues the trend of more affordable and increasingly powerful FPGA boards, making it a great entry […]