LILYGO’s T3 S3 LR1121 is an ESP32 Powered Dev board with Onboard LoRa, SD Card and OLED Display
https://www.electronics-lab.com/lilygos-t3-s3-lr1121-is-an-esp32-powered-dev-board-with-onboard-lora-sd-card-and-oled-display/
LILYGO’s T3 S3 LR1121 can be considered an ESP32S3FH4R2 MCU-based versatile microcontroller board with 4MB Flash and 2MB PSRAM. It is designed for projects requiring both Wi-Fi and Bluetooth 5.0 connectivity with a compact design. Key features include a 66x36mm size, support for USB charging (500mA at 5V), and onboard functions like a reset button, […]
LicheePi 3A: A RISC-V Linux SBC with SpacemIT K1 SoC and LM3A Module
https://www.electronics-lab.com/licheepi-3a-a-risc-v-linux-sbc-with-spacemit-k1-soc-and-lm3a-module/
Sipeed LicheePi 3A is a RISC-V Linux development board built on the Lichee Module 3A, featuring the SpacemIT K1 SoC with 8xX60 cores running at 1.6 GHz, RV64GCV architecture, 2TOPS int8 NPU, and a 20GFLOP GPU. It supports up to 16GB 32-bit LPDDR4X RAM, 128GB eMMC storage, and offers dual 1080P display output via HDMI […]
Raspberry PI RP2350 Compact Boards also comes with a Carrier board
https://www.electronics-lab.com/raspberry-pi-rp2350-compact-boards-also-comes-with-a-carrier-board/
Sweden-based consumer electronics company Solder Party has just released two new RP2350 Compact Boards named the RP2350 Stamp, and RP2350 Stamp XL. The company has also released a carrier board that can be configured with either the RP2350 Stamp or the RP2350 Stamp XL. As the RP2350 Stamp has a more compact form factor the GPIO […]
LILYGO’s T-TWR REV2.1 – An ESP32-Based Walkie Talkie Development Board with GPS Functionality
https://www.electronics-lab.com/lilygos-t-twr-rev2-1-an-esp32-based-walkie-talkie-development-board-with-gps-functionality/
LILYGO’s T-TWR REV2.1 can be considered an ESP32-S3-based development board with built-in Walkie-Talkie features. Because the board is built around an EPS32-S3 it already has Wi-Fi and Bluetooth capabilities. With the addition of another GPS module, this becomes very useful for developing portable communication devices, asset-tracking solutions, and other outdoor applications that require location awareness. […]
Boardcom RK3576 Powered SoM and Development Board Supports 12 Analog Camera Inputs
https://www.electronics-lab.com/boardcom-rk3576-powered-som-and-development-board-supports-12-analog-camera-inputs/
Boardcom has recently introduced CM3576 SoM and EM3576 its associated development board, together with a development kit. The unique thing about this kit is that it supports 12 analog camera inputs along with various interfaces like HDMI, GbE Ethernet, USB, Serial GPIO, and much more. Previously we have covered many SoM and development boards powered […]
Microchip dsPIC33A Series Features High-Performance Digital Signal Controller with Double Precision FPU and Analog Intrerface
https://www.electronics-lab.com/microchip-dspic33a-series-features-high-performance-digital-signal-controller-with-double-precision-fpu-and-analog-intrerface/
Microchip Technology has released a new family of Digital Signal Controllers (DSCs) called dsPIC33A. These controllers are designed for time-constrained systems that need fast and precise control. The DSCs are built with a 32-bit architecture with a double-precision floating-point unit (DP FPU) and a DSP engine for quickly handling math and data. The dsPIC33A DSCs […]
SB Components StackyFi A ESP32-S3 Board in Raspberry Pi Zero From Factor
https://www.electronics-lab.com/sb-components-stackyfi-a-esp32-s3-board-in-raspberry-pi-zero-from-factor/
SB Components StackyFi is an ESP32-S3 powered development board in a Raspberry Pi Zero Form Factor. The board features a 40-pin GPIO header which is compatible with most Raspberry Pi HAT. The board also has dual USB-C ports (one native, one for serial debugging), an IMU sensor, an RGB LED, and Boot/Reset buttons. The board […]
Pico Display Base Board – A Versatile Platform for Raspberry Pi Pico based LCD Projects
https://www.electronics-lab.com/pico-display-base-board-a-versatile-platform-for-raspberry-pi-pico-based-lcd-projects/
The Pico Display Base Board is a compact PCB board designed to simplify the creation of projects using a Raspberry Pi Pico and an LCD screen. The board includes onboard components like buttons and LEDs, as well as ports for additional modules like an RTC module, OLED display, or Infrared receiver. It’s particularly well-suited for […]
Luckfox Pico Ultra is a Rockchip RV1106-based Linux board
https://www.electronics-lab.com/luckfox-pico-ultra/
Luckfox Pico Ultra is a Rockchip RV1106-based micro Linux dev board with 0.5 Tops NPU to run AI that can be configured to run AI tasks. The board also features a MIPI CSI port, an Ethernet port GPIO, UART, RGB LED header, SPI, I2C, USB, a speaker interface, and much more. Waveshare also offers two […]
Banana Pi BPI-Centi-S3 is A ESP32-S3 Powered Dev Board with 1.9-inch TFT Display
https://www.electronics-lab.com/banana-pi-bpi-centi-s3-is-a-esp32-s3-powered-dev-board-with-1-9-inch-tft-display/
Banana Pi BPI-Centi-S3 is an ESP-32 S3-powered dev board with a 1.9-inch color TFT display, a rotary encoder, and a WS2812B NeoPixcel LED. GPIO and much more. These features make this board similar to the LILYGO T-Panel, LILYGO T4 S3, T-Display-S3-Long, and other display products that we have covered in our previous posts. The board […]