10A 400V DC Intelligent Power Module (IPM)
https://www.electronics-lab.com/10a-400v-dc-intelligent-power-module-ipm/
10 Amp 400V DC Intelligent power module board has been designed using ON Semiconductors STK544UC62K. This Inverter IPM module includes the output stage of a 3-phase inverter, pre-drive circuits, bootstrap circuits, protection circuits, op-amp based current sense circuit, comparator circuit for fault/Over current output, Bus voltage output, onboard 5V DC regulator for op-amp circuit. This […]
3 Phase AC Motor Controller
https://www.electronics-lab.com/3-phase-ac-motor-controller/
This project made using MC3PHAC from NXP Semiconductor. The project generates 6 PWM signals for 3 Phase AC Motor controller. It’s very easy to make professional VFD combining with Intelligent Power Module (IPM) or 3 Phase IGBT/MOSFET with Gate driver. The board provides 6 PWM signals for the IPM or IGBT Inverter and also brake […]
High Voltage-Current Half Bridge Driver Using IR2153 & IGBT
https://www.electronics-lab.com/high-voltage-current-half-bridge-driver-using-ir2153-igbt/
IGBT based half bridge board has been designed for multiple applications, like induction heater driver, tesla coil driver, DC-DC converters, SMPS etc. High current and high voltage IGBTs are used to serve high power requirements. IGBT NGTB40N120FL2WG from ON semi and IR2153 from Infineon semiconductor are important parts of the circuit, IR2153 is a gate […]
Inteligent Power Module (IPM) Board for Brushless Motors
https://www.electronics-lab.com/inteligent-power-module-ipm-board-brushless-motors/
Intelligent Power Module (IPM) board has been designed using FSBS5CH60 IC from Fairchild, which provides a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockouts, over-current shutdown, […]