Ant USB-C LiPo Charger on Tindie
USB

Ant USB-C LiPo Charger on Tindie

The USB-C has been around for quite a while, but there is still a lack of a miniature basic USB-C chargers for LiPo battery. I decided to make my own with as minimal footprint as possible, which resulted in being 13.5mm x 16mm. A well known MCP73831T-2ATI/MC is used as a battery...

Continue Reading
3.084
Views
0 Comments
2x LiPO Battery to 12V and 5V Converter
Power

2x LiPO Battery to 12V and 5V Converter

This board provides 12V/200mA DC and 1.2V to 6V/500mA DC Adjustable output with input of 7.4V 2x LiPO batteries.  The board is a step up DC-DC Convert based on CS5171 and LM317 adjustable regulator. The Step up DC-DC converter provides 12V DC from 7.4V ( 2x LiPO batteries) and LM317...

Continue Reading
3.448
Views
0 Comments
LoraDunchy – Arduino Compatibile LoRa module
IoT

LoraDunchy – Arduino Compatibile LoRa module

Lora board with Arduino nano compatibile pinout and simple battery management. Small board with arduino nano compatibile pinout with power management and Murata ABZ LoRa module with STM32L0 microcontroller Features: LoRa module: Murata ABZ Single cell LiPo cell charger...

Continue Reading
4.995
Views
0 Comments
Lipo Charge/Boost/Protect board in 18650 cell holder format
Power

Lipo Charge/Boost/Protect board in 18650 cell holder format

Peter6960 published a new build: So couple months ago, GreatScott made a video where he designed a circuit. Nothing too innovative, just the same TP4056 charger the MT3608 Boost combined on one PCB. He did add a Lipo protection circuit though, initially using the same DW01. But then,...

Continue Reading
5.388
Views
0 Comments
SODAQ ONE board – GPS + LoRa + Solar charger
IoT

SODAQ ONE board – GPS + LoRa + Solar charger

This is the third generation of our succesful SODAQ ONE board. It is equipped with a solar charge controller and runs on a LiPo or a permanent battery. It has the Ublox Eva 8M GPS module which is not only miniature but with it's assisted GPS feature it can get a fix within seconds....

Continue Reading
6.758
Views
0 Comments
Torpedo 2 – a cheap & powerful 3A DC/DC converter with built-in charger
Power supply

Torpedo 2 – a cheap & powerful 3A DC/DC converter with built-in charger

Boris Landoni @ open-electronics.org presents their second version of Torpedo, a kind of DC-DC converter able to provide 5V output from a variety of sources. He writes: Some time ago we had introduced you to the Torpedo switching power supply, a particular kind of DC/DC power supply...

Continue Reading
4.117
Views
0 Comments
Versatile And Open Source LiPo bBattery Breadboard Power Supply
HardwareICPower supply

Versatile And Open Source LiPo bBattery Breadboard Power Supply

Orlando Hoilett from Calvary Engineering LLC designed a  versatile Li-Po battery breadboard power supply and wrote an Instructables on it. This power supply outputs 3.3V to the breadboard and takes input from a single-cell LiPo battery. The breadboard power supply also has the...

Continue Reading
7.670
Views
0 Comments
A 32-BIT FISHINO board with WiFi, SD card, RTC, audio codec, LiPo and more
Arduino

A 32-BIT FISHINO board with WiFi, SD card, RTC, audio codec, LiPo and more

Boris Landoni @ open-electronics.org presents his 32bit Arduino Compatible board which has some nice features on board. He wrties: Our prototyping board acquires a 32-bit processor and sets the bar high, towards demanding applications that may take full advantage of the WiFi...

Continue Reading
5.120
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives