WebScreen – ESP32-S3 Powered Secondary AMOLED Display for Notifications
https://www.electronics-lab.com/webscreen-esp32-s3-powered-secondary-amoled-display-for-notifications/
WebScreen is a customizable secondary ESP32-powered display that perches on top of a monitor, designed to show essential notifications, reminders, and visuals without disrupting workflow. It features a high-quality AMOLED display (240×536 resolution, 16.7M colors). It is Ideal for both productivity and gaming, also helps users stay informed without constantly checking their phone. The display supports USB […]
Luckfox Pico WebBee RV1103 Linux Development Board Features ARM Cortex-A7 and RISC-V MCU with Ethernet and USB for IoT and Smart Home Projects
https://www.electronics-lab.com/luckfox-pico-webbee-rv1103-linux-development-board-features-arm-cortex-a7-and-risc-v-mcu-with-ethernet-and-usb-for-iot-and-smart-home-projects/
The Luckfox Pico WebBee RV1103 Linux Micro Development Board is a cost-effective development platform powered by the Rockchip RV1103 chip, integrating a single-core ARM Cortex-A7 processor running at 1.2GHz alongside a RISC-V MCU. It features 64MB of DDR2 RAM, a 10/100Mbps Ethernet port with an embedded PHY, and 128MB SLC NAND Flash for reliable storage. […]
W5100S And W5500: Raspberry Pi RP2350 Based Embedded Internet Controllers for Your IoT Projects
https://www.electronics-lab.com/w5100s-and-w5500-raspberry-pi-rp2350-based-embedded-internet-controllers-for-your-iot-projects/
The WIZnet has recently launched two Raspberry Pi RP2350-based – W5100S-EVB-Pico2 and W5500-EVB-Pico2 Embedded Internet controllers with TCP/IP stack that simplifies Internet connectivity for embedded systems. The W5100S supports both SPI (up to 70MHz) and Parallel System Bus interfaces, while the W5500 exclusively uses SPI (up to 80MHz). Both chips integrate 10/100 Ethernet MAC and […]
CANable 2.0 is an Open-Source USB-to-CAN Adapter with SocketCAN and Slcan Support
https://www.electronics-lab.com/canable-2-0-is-an-open-source-usb-to-can-adapter-with-socketcan-and-slcan-support/
The CANable 2.0 USB-to-CAN Adapter is a small, low-cost, open-source USB-to-CAN adapter that allows your computer to communicate with devices on a CAN bus network. It supports both standard CAN and CAN-FD and is compatible with various operating systems including Linux, Mac, and Windows. Key features of this device include a USB-C connector, onboard termination, […]
How to Build a Mini Mac Classic with Raspberry Pi and 3D Printing
https://www.electronics-lab.com/how-to-build-a-mini-mac-classic-with-raspberry-pi-and-3d-printing/
The Mini Mac Pi is another project developed by Ruiz Brothers on the Adafruit Learning System. This miniature MAC comes with Raspberry Pi, 320×240 Mini touch screen display, and a speaker. This article will focus on building the Mini Mac classic with 3D printing and the Raspberry Pi. To get started with Mini Mac Pi, […]
Turn Your iPad Into A Second Screen with Luna
https://www.electronics-lab.com/turn-ipad-second-screen-luna/
It is possible now to turn your iPad into a second display using Luna Display! Luna Display is a hardware solution that extends your Mac desktop to your iPad, creating a wireless second monitor maintaining high resolution. In fact, Luna is one of Astro HQ products, a startup working on delivering tools for designers and […]
MAC Address Finder
https://www.electronics-lab.com/mac-address-finder/
Quickly find the MAC address on devices where doing so isn’t so easy. Sometimes finding the MAC address of a wireless device is easy and sometimes it’s not. With this project you can find the MAC address of any wireless device in just a few seconds. What makes this project so simple is the Feather […]