Dual DC Motor Driver For Robot with L298
https://www.electronics-lab.com/dual-dc-motor-driver-robot-l298/
Dual Motor L298 H-Bridge Control project can control two DC motors connected to it. The circuit is designed around popular dual H-Bridge L298 from ST. This board can be configured to drive a single motor with high current rating also. This can be achieved with the help of jumpers on the board. An onboard 5V […]
Half Bridge Driver based on IR2104
https://www.electronics-lab.com/half-bridge-driver-based-ir2104/
This Half-bridge driver based on IR2104 gate driver IC and N channel Dpak MOSFET , The IR2104 is a high voltage, high speed power MOSFET driver with independent high and low side referenced output channels. HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard COMOS or LSTTL […]
Dual DC Motor driver using two L293D
https://www.electronics-lab.com/dual-dc-motor-driver-using-two-l293d/
Dual DC Motor driver using two L293D IC. The L293D device is quadruple high-current half-H driver. The 293D is designed to provide bidirectional drive current up to 600mA a voltage from 5V to 36V. It provides 600mA +600mA on each channel suitable for mini hobby robots. The board been designed mainly for small size robot, […]
AC Motor Speed Controller using U2008B
https://www.electronics-lab.com/ac-motor-speed-controller-using-u2008b/
This low cost current feedback phase control AC motor driver based on U2008 IC, The U2008B is designed as a phase control circuit in bipolar technology. It enables load-current detection as well as mains-compensated phase control. Motor control with load-current feedback and overload protection are preferred application. Specifications Supply In-put: 230V AC Load: Up to […]
DC Motor Speed and Direction Controller
https://www.electronics-lab.com/dc-motor-speed-and-direction-controller/
DC Motor Speed and direction controller project based on L293D H-Bridge and 555 Timer IC. 555 Generate PWM and L293D works as output driver. The 293D provides bidirectional drive current up to 600mA a voltage from 5V to 12V. L293D includes the output clamping diodes for protections. Specifications Supply 5 to 12 V Inhibit facility/enable […]
Piezoelectric motor demo
https://www.electronics-lab.com/piezoelectric-motor-demo/
Quick demonstration of a piezoelectric motor from www.pcbmotor.com Piezoelectric motor demo – [Link]
Arduino – Processing Laser CNC Project
https://www.electronics-lab.com/arduino-processing-laser-cnc-project/
Neumi @ github.com has build an Arduino based CNC project and source files are provided. This is my scratch build Laser CNC Engraver and PCB Exposer. It uses a 150mW 405nm laser diode and two CD drive motors and mechanics. A Processing sketch calculates the position of the pixels and send them to an Arduino Mega, […]
4A Bipolar Stepper Motor Driver Based on LV8727E
https://www.electronics-lab.com/4a-bipolar-stepper-motor-driver-based-on-lv8727e/
The Project is based on LV8727E IC from ON Semiconductor. The LV8727 is a PWM current-controlled micro step bipolar stepping motor driver. This driver can provide eight ways of micro step resolution of 1/2, 1/8, 1/16, 1/32, 1/64, 1/128, 1/10, 1/20, and can drive simply by the step input. This Bipolar Driver works with supply […]
DC Motor Direction Controller with tact switches
https://www.electronics-lab.com/dc-motor-direction-controller-with-tact-switches/
DC Motor Direction Control project offers direction control using digital logic gates and a DPDT relay. Features Supply input 12 VDC @ 75 mA Power LED DC Motor Direction LED Yellow/Green Relay Output: up to 7 A Onboard tactile switch for direction control Relay based drive design with diode protection LED indicator for direction indication […]
LMD18200 H-Bridge Module for DC Motor
https://www.electronics-lab.com/lmd18200-h-bridge-module-for-dc-motor/
The module has been designed around LMD18200 from Texas Instruments. The LMD18200 is a 3A H-Bridge designed for motion control applications. The device is built using a multi-technology process which combines bipolar and CMOS control circuitry with DMOS power devices on the same monolithic structure. Ideal for driving DC and stepper motors; the LMD18200 accommodates […]