Radxa CM3J SoM with Rockchip RK3568J SoC Offers LPDDR4x RAM, Wi-Fi 5, and Bluetooth 5.0 for Industrial Applications
https://www.electronics-lab.com/radxa-cm3j-som-with-rockchip-rk3568j-soc-offers-lpddr4x-ram-wi-fi-5-and-bluetooth-5-0-for-industrial-applications/
Radxa CM3J is a SoM targeted at industrial use and shares the Raspberry Pi Compute Module 4 form factor. It is based on Rockchip RK3568J, a 64-bit quad-core Cortex-A55 processor running at 2.0GHz, and has support for an extended temperature range. The module includes up to 8GB LPDDR4x RAM and up to 256GB eMMC flash. […]
Sipeed NanoCluster: Compact Multi-SOM Computing Platform with RISC-V Gigabit Ethernet Switch and PoE Support
https://www.electronics-lab.com/sipeed-nanocluster-compact-multi-som-computing-platform-with-risc-v-gigabit-ethernet-switch-and-poe-support/
Sipeed’s RPi-sized NanoCluster is a compact computing platform designed for multi-SOM configurations, balancing size and functionality. It supports up to seven system-on-modules (SoM), including the LM3H, CM4, CM5, and M4N, and features an onboard open-source RISC-V Gigabit Ethernet switch, 60W PD/PoE power support, and UART/PWR control. This makes it suitable for various distributed computing applications. […]
BIGTREETECH’s Raspberry Pad 5 Powered by Raspberry Pi CM4 is suitable for 3D Printers
https://www.electronics-lab.com/bigtreetechs-raspberry-pad-5-powered-by-raspberry-pi-cm4-is-suitable-for-3d-printers/
Shenzhen-based 3D printing device manufacturer BIGTREETECH has released the Raspberry Pi Compute Module 4 powered breakout board with an onboard 5-inch IPS touch display screen– named Raspberry Pad 5. Specifically designed for FDM 3D printers, the 5-inch capacitive touchscreen display comes with a resolution of 800×480 pixels and provides a wide viewing angle. Other than […]
This Compute Module 4 Hunter is set to challenge Official CM4 Carrier Board
https://www.electronics-lab.com/this-compute-module-4-hunter-is-set-to-challenge-official-cm4-carrier-board/
Swiss-based founder of Quick-Pick AG, Andreas Eberle, has designed a complete Raspberry system with hardware and software utilizing the power of Raspberry CM4 that lets you use interfaces and industrial communication protocols without the need to buy any additional HATs. This Compute Module 4 Hunter is up for crowdfunding via Kickstarter with the goal of $15,490. […]