NBIOT/LTE-M1 Air Monitor: ESP32-S3-WROOM-1 and SIM7080G with GNSS for Greenhouse Monitoring

---

https://www.electronics-lab.com/nbiot-lte-m1-air-monitor-esp32-s3-wroom-1-and-sim7080g-with-gnss-for-greenhouse-monitoring/

The NBIOT/LTE-M1 Air Monitor uses an ESP32-S3-WROOM-1 controller and a SIM7080G module for cellular data transmission. It monitors temperature, humidity, CO2 levels, TVOC, and light intensity. The device is powered by an internal 18650 LiPo battery, charged by a solar panel with MPPT CN3791 for efficient power management. Designed for greenhouse monitoring, it uses low-power […]

Makerfabs ESP32-S3 Based NBIOT/LTE-M Air Monitor with Solar Charging is Designed for Remote Environmental Monitoring

---

https://www.electronics-lab.com/makerfabs-esp32-s3-based-nbiot-lte-m-air-monitor-with-solar-charging-is-designed-for-remote-environmental-monitoring/

Macakerfabs has recently introduced an Air Monitor with NBIOT and LTE-M named NBIOT/LTE-M Air Monitor, the module uses an ESP32-S3 with SIM7080G for remote environmental monitoring. The device can measure environmental parameters like temperature, humidity, CO2, TVOC, and light intensity sensors and can send data through a low-power wide-area network (LPWAN). The most interesting thing about […]

Compact ESP32-S3 SoC board with Cat-M & NB-IoT Support by LILYGO

---

https://www.electronics-lab.com/compact-esp32-s3-soc-board-with-cat-m-nb-iot-support-by-lilygo/

A compact embedded board from LILYGO with Wi-Fi/BL5.0 and the SIM7080G module for CAT-M and NB-IoT connectivity has been launched recently. The SIM7080G is an SMT-type Multi-Band CAT-M and NB-IoT module. It is easy to add on to because it has many interfaces, such as UART, GPIO, PCM, SPI, I2C, etc. The module gives the […]