Tag: SPI
0.86″ 96×32 White Graphic OLED Display Module
This is a 0.86" 96x32 White Graphic OLED Display Module supporting SPI,MCU,I2C Main features 0.86" 96 X 32 Pixel CPU Interface: 8-bit 6800/8080 Parallel, 4-wire SPI, 3-wire SPI, I2C (default) Drive IC: SSD1316 Display Colors :White Graphic OLED The OLED...
Continue Reading2.0″ 240×320 Transflective Display Panel – SPI, MCU, RGB
This is a new 2" Transflective Display Panel with part number DM-TFT20-386 available from www.displaymodule.com for $15.99 . It can be interfaced to any microcontroller through SPI. Transflective TFT LCD, Visible under sunlight 2.0" 240x320 Pixels Full view direction by...
Continue ReadingProgrammable USB Hub will soon launch on Crowdsupply
A USB hub that's also a dev board and an I2C, GPIO, and SPI bridge. In addition to being a 4-port USB 2 High-Speed hub, this Programmable USB hub is also: A CircuitPython based development board. A bridge between your computer and I2C (via Sparkfun Qwiic connectors), GPIO,...
Continue ReadingWidget Dashboard for ATtiny85
This project is a dashboard for displaying the outputs from up to four different sensors or Internet of Things devices. It's based on an ATtiny85 driving an SPI 96x64 SD1331 colour OLED display. by David Johnson-Davies: You can include any widgets from a selection of different types,...
Continue ReadingColour Graphics Library for SD1331 OLED display
David Johnson-Davies published a new project. It is a library for SD1331 OLED display module that can even run on ATtiny85 mcu. This is a small color graphics library for an SPI 96x64 colour OLED display based on an SD1331. It allows you to plot points, lines, filled and open...
Continue ReadingHigh accuracy 3-axis inclinometer with digital true inclination angle output
Murata has announced a new 3-axis inclination sensor with a tilt angle output and digital SPI interface. The high performance SCL3300 series of devices will be used in a variety of demanding applications including levelling, tilt sensing, machine control and structural health...
Continue Reading2.13″ 212 x 104 Three Color E-Ink Paper with SPI
DisplayModule introduced a tiny 2.1″ E-paper display with 212×104 pixels resolution and three colors. The display can be interfaced using SPI and a Raspberry Pi shield is available for the ones that what to connect it to the popular SBC. Main features Three Color E-Ink 2.13...
Continue ReadingLoRa-to-Ethernet Gateway
A WIZ750SR based device that allows sending and receiving messages over LoRa and LoRaWAN. I got some LoRa modules with SPI communication interface. One of the options it would have been to connect them to my Raspberry Pi. But, I didn't really like the idea because I already have some...
Continue Reading