Texas Instruments TMUX741xF SPST Four-Channel Switches
https://www.electronics-lab.com/texas-instruments-tmux741xf-spst-four-channel-switches/
Texas Instruments TMUX741xF SPST Four-Channel Switches are complementary metal-oxide semiconductor (CMOS) analog switches in 1:1 (SPST), 4-channel configurations. The devices work well with dual supplies (±5V to ±22V), a single supply (8V to 44V), or asymmetric supplies (such as VDD = 12V, VSS = –5V). The overvoltage protection is available in powered and powered-off conditions, […]
Texas Instruments TMAG5231 Low-Power Hall Effect Switch
https://www.electronics-lab.com/texas-instruments-tmag5231-low-power-hall-effect-switch/
Texas Instruments TMAG5231 Low-Power Hall Effect Switch is specifically designed to optimize the total system cost for compact, battery-operated consumer and industrial applications. The device outputs a low voltage when the applied magnetic flux density exceeds the operating point (BOP) threshold. The output stays low until the flux density decreases to less than the release […]
Under Speed Warning Alarm for Magnetic Pickup sensor – Frequency Controlled Switch
https://www.electronics-lab.com/under-speed-warning-alarm-for-magnetic-pickup-sensor-frequency-controlled-switch/
This is an under-speed sensor module that provides an audible warning and signals output when the speed of a machine is below the set point. The module can be used in applications such as Engines, Machines, Sports machines, Fitness Equipment, Speed of the machine or engine can be detected using a magnetic pickup sensor. The […]
Qorvo QPC1006 Single-Pole, Triple–Throw (SP3T) RF GaN Switch
https://www.electronics-lab.com/qorvo-qpc1006-single-pole-triple-throw-sp3t-rf-switch/
Qorvo QPC1006 Single-Pole, Triple–Throw (SP3T) Switch is fabricated on Qorvo’s QGaN25 0.25um GaN on SiC production process. Operating from 0.15 to 2.8GHz, the QPC1006 typically supports 50W input power handling at control voltages of 0/−40V for CW and pulsed RF operations. This switch maintains a low insertion loss of less than 1.0dB and greater than […]
Schurter Capacitive Hidden Switch (CHS) Metal Line Switches
https://www.electronics-lab.com/schurter-capacitive-hidden-switch-chs-metal-line-switches/
Schurter Capacitive Hidden Switch (CHS) Metal Line Switches are intended for use behind non-conductive surfaces, enabling interface designers more flexibility in custom panel designs. These capacitive switches can be used as a single key or in arrays. The standard switches can be mounted behind a glass surface up to 2mm in thickness. The sensitivity level […]
NJR (New Japan Radio) NJG1816K75-TE1 Ultra Low Current SPDT Switch
https://www.electronics-lab.com/njr-new-japan-radio-njg1816k75-te1-ultra-low-current-spdt-switch/
NJR (New Japan Radio) NJG1816K75-TE1 Ultra Low Current SPDT Switch is a 2-bit control SPDT switch GaAs Monolithic Microwave Integrated Circuit (MMIC) suited for LPWA applications. This switch operates at low control voltage from 1.6V and is ideal for IoT devices with battery operation because of ultra-low current consumption. The NJG1816K75-TE1 ultra-low current SPDT switch […]
KLS Series Illuminated Pushbutton
https://www.electronics-lab.com/kls-series-illuminated-pushbutton/
C&K’s pushbutton switch has audible feedback and provides the status of the switches’ positioning C&K’s KLS series pushbutton switch meets market requirements on haptic and sound with clear “click” sound feedback. It provides the status of the switches’ positioning (on/off) and a clear indication of its functioning. The KLS pushbutton is available as SPDT and […]
NJR (New Japan Radio) NJG1817ME4-TE1 10W High Power SPDT Switch
https://www.electronics-lab.com/njr-new-japan-radio-njg1817me4-te1-10w-high-power-spdt-switch/
NJR (New Japan Radio) NJG1817ME4-TE1 10W High Power SPDT Switch offers a high power handling capability of 40dBm. This SPDT switch also offers high linearity and low insertion loss up to 6GHz. The high-power SPDT switch features a high switching speed that is enough capable of 5G communications. This high-power SPDT switch operates from 2V […]
RT1105 Series Reverse Through-Hole Tact Switch
https://www.electronics-lab.com/rt1105-series-reverse-through-hole-tact-switch/
E-Switch’s RT1105 tact switch features a soft silicon 4.40 mm high actuator and provides multiple gram force options E-Switch’s RT1105 series reverse through-hole tact switch with multiple gram force options provides up to 100,000 cycle life expectancy in a 6.80 mm x 6.80 mm footprint. This switch series features a soft silicon actuator 4.40 mm […]
Controlling a LED with ESP32-C3-DevKITM-1 Development Board using ESP-IDF
https://www.electronics-lab.com/deep-dive-on-controlling-led-with-esp32-c3-devkitm-1-development-board-using-esp-idf/
In this article, we will explore another onboard functionality of Espressif’s ESP32-C3-DevKITM-1 which is the onboard RGB LED. With its powerful connectivity, compact size at such a low cost the ESP32-C3- DevKit M-1 board is a must-try for your next IoT project. You can read the official documentation of the development board as well. The […]