LILYGO’s T-TWR REV2.1 – An ESP32-Based Walkie Talkie Development Board with GPS Functionality
https://www.electronics-lab.com/lilygos-t-twr-rev2-1-an-esp32-based-walkie-talkie-development-board-with-gps-functionality/
LILYGO’s T-TWR REV2.1 can be considered an ESP32-S3-based development board with built-in Walkie-Talkie features. Because the board is built around an EPS32-S3 it already has Wi-Fi and Bluetooth capabilities. With the addition of another GPS module, this becomes very useful for developing portable communication devices, asset-tracking solutions, and other outdoor applications that require location awareness. […]
Makerfabs ESP32-S3 Based NBIOT/LTE-M Air Monitor with Solar Charging is Designed for Remote Environmental Monitoring
https://www.electronics-lab.com/makerfabs-esp32-s3-based-nbiot-lte-m-air-monitor-with-solar-charging-is-designed-for-remote-environmental-monitoring/
Macakerfabs has recently introduced an Air Monitor with NBIOT and LTE-M named NBIOT/LTE-M Air Monitor, the module uses an ESP32-S3 with SIM7080G for remote environmental monitoring. The device can measure environmental parameters like temperature, humidity, CO2, TVOC, and light intensity sensors and can send data through a low-power wide-area network (LPWAN). The most interesting thing about […]
tinySniffer: WiFi-Connected USB Sniffer Based on NanoPi NEO Air SBC
https://www.electronics-lab.com/tinysniffer-wifi-connected-usb-sniffer-based-on-nanopi-neo-air-sbc/
tinySniffer is a USB sniffer designed to capture USB 1.x and 2.0 packets remotely. Based on the Allwinner H3-powered NanoPi Neo Air SBC, tinySniffer makes use of WiFi connectivity to enable remote packet capture, and the captured data is compatible with the popular Wireshark packet analyzer tool. While Wireshark can already capture USB packets, it […]
X-Sense STH51/STH54 Thermo Hygrometer Review – Accurate Climate Monitoring with Swiss Sensor and WiFi Connectivity
https://www.electronics-lab.com/x-sense-sth51-sth54-thermo-hygrometer-review-accurate-climate-monitoring-with-swiss-sensor-and-wifi-connectivity/
The X-Sense STH51/STH54 Thermo Hygrometer is a WiFi-enabled device for precise and convenient indoor climate monitoring. Featuring high-precision Swiss-made sensors, it delivers temperature accuracy of ±0.36°F (±0.2°C) and humidity accuracy of ±2% RH. The device also has Wi-Fi with an open-air transmission range of 1700ft or 500m, so you can connect it to your home […]
LILYGO T3S3 E-Paper: ESP32-S3 WiFi & BLE SoC with LoRa Module and 2.13-inch E-Paper Display
https://www.electronics-lab.com/lilygo-t3s3-e-paper-esp32-s3-wifi-ble-soc-with-lora-module-and-2-13-inch-e-paper-display/
The LILYGO T3S3 E-Paper is an innovative development board that combines the ESP32-S3 WiFi and Bluetooth LE SoC with a 2.13-inch e-Paper display and an SX1262 LoRa module, making it suitable for off-grid messaging even in sunlight. Specifications: Wireless Module: ESP32-S3-WROOM-1U SoC: ESP32-S3FH4R2 dual-core Tensilica LX7 microcontroller @ up to 240 MHz 2.4 GHz 802.11n […]
LILYGO T-Encoder-Pro: ESP32-S3 WiFi/BT Rotary Encoder with AMOLED Touchscreen
https://www.electronics-lab.com/lilygo-t-encoder-pro-esp32-s3-wifi-bt-rotary-encoder-with-amoled-touchscreen/
The LILYGO T-Encoder-Pro is an ESP32-S3-based rotary encoder with a 1.2-inch AMOLED touchscreen display. The touchscreen features a 390×390 pixels resolution and has a pair of Qwiic connectors for additional peripheral support. The device also includes an onboard buzzer for auditory feedback, a USB Type-C port for data and power, and three threaded brass inserts […]
ThingPulse’s ESP32-S3-based Compact Pendrive S3 128MB
https://www.electronics-lab.com/thingpulses-esp32-s3-based-compact-pendrive-s3-128mb/
ThingPulse has developed a USB-C plug featuring ESP32-S3, flash memory of 128MB, and capacitive touch for commands. This ThingPulse Pendrive S3 can work as a BadUSB device, sending hundreds of keystrokes per second and executing predefined commands through simple scripts. The WiFi Duck enhances this capability by providing wireless control over these scripts via a […]
Qualcomm Announces the Edge AI RB3 Gen 2 Chip for IoT and Robotics and a “Micro-Power” Wi-Fi SoC
https://www.electronics-lab.com/qualcomm-announces-the-edge-ai-rb3-gen-2-chip-for-iot-and-robotics-and-a-micro-power-wi-fi-soc/
Qualcomm has introduced two innovative products designed to advance the Internet of Things (IoT) and robotics projects: the RB3 Gen 2 system-on-chip (SoC) and a “micro-power Wi-Fi system” SoC. These new offerings aim to provide high-performance computing and significant power savings for embedded applications. The RB3 Gen 2 SoC is built on the Qualcomm QCS6490 […]
Introducing the Banana Pi BPI-M5 Pro: A Next-Generation AIOT Platform
https://www.electronics-lab.com/introducing-the-banana-pi-bpi-m5-pro-a-next-generation-aiot-platform/
The Banana Pi BPI-M5 Pro presents a cutting-edge solution for AIOT (AI + IoT) applications, boasting the advanced features of the second-generation 8nm high-performance Rockchip RK3576 chip design. This powerhouse is equipped with a 6 TOPS computing power NPU (Neural Processing Unit) and supports up to 32GB of expansive memory, ensuring seamless performance for a […]
X-SENSE SC07-WX WiFi Smoke & CO Alarm Review – Your Smart Home Guardian for Smoke and CO
https://www.electronics-lab.com/x-sense-sc07-wx-wifi-smoke-co-alarm-review-your-smart-home-guardian-for-smoke-and-co/
The X-Sense SC07-WX is a battery-powered smoke and carbon monoxide detector that combines Wi-Fi connectivity with a smartphone app for remote monitoring and alerts. The sensor uses a photoelectric smoke sensor and an advanced electrochemical carbon monoxide sensor for fast and accurate detection. The device has its own Android and iOS application and directly connects […]