Home Community

Electronic Circuit Help

Author Topic: Electronic Circuit Help  (Read 2340 times)

kbyrne

  • Newbie
  • *
  • Posts: 47
    • View Profile
    • Email
Electronic Circuit Help
« on: April 28, 2011, 07:23:16 AM »
http://www.electronics-lab.com/forum/index.php?action=post;board=13.0
Newbi needs assistance with a DC-DC Converter kit that is defective in the required
IC calls for a CD4001 with 14 pins and the board has only 8 pins. I desire to redo the board as it is deffective but do not have a schematic to work with only a parts list and a two sided board. What to do next. Any help would be appreciated.

kxenos

  • Newbie
  • *
  • Posts: 13
    • View Profile
    • Email
Re: Electronic Circuit Help
« Reply #1 on: May 23, 2011, 06:51:38 PM »
Probably the IC that came with the kit is of wrong type. (probably someone equally unlucky will have a board with 14 holes and an IC with 8 pins, and his kit also won't work). Try to google every code the board has on it in order to find the manufacturer and send them an e-mail. :-)

Konstantinos

indulis

  • Electronics God
  • *****
  • Posts: 659
    • View Profile
Re: Electronic Circuit Help
« Reply #2 on: May 26, 2011, 07:05:07 AM »
What makes you think the kit is defective? Does the parts list agree with the PCB? Do the parts in the kit agree with the parts list?

TomTang

  • Newbie
  • *
  • Posts: 7
    • View Profile
    • Email
Re: Electronic Circuit Help
« Reply #3 on: June 16, 2011, 10:45:23 PM »
we can design many kinds of power for car, bulk and boost circuit. if you need any help, can you send us messages.

kbyrne

  • Newbie
  • *
  • Posts: 47
    • View Profile
    • Email
Re: Electronic Circuit Help
« Reply #4 on: February 12, 2012, 12:14:30 PM »
Just a final note from the author: I redid the board with a 8 leg IC  Part # ua741 and project is complete.
The board was redone in Eagle only one sided instead of origional two sided type. It worked the first time out. Thanks for assistance to all.