Home Community

circuit isolation

Author Topic: circuit isolation  (Read 875 times)

eplanet

  • Sr. Member
  • ****
  • Posts: 469
  • Gender: Male
  • Take localy start globaly
    • View Profile
circuit isolation
« on: February 23, 2012, 04:42:35 AM »
hi
i have problem with my micro controller (PIC)  board for control of camera (turn left and right). in this circuit used 7805 for making 5voltage for all component of circuit and camera (cctv work with 5v). but when turning on this circuit , av receiver can't  receive signal from camera. but when i disconnected this camera from circuit and plug in to different 5v power supply work very well and i have good signal in AV receiver.

i guess problem is in power supply (maybe noise ).

have you any idea for this circuit that work with one 9-12v adapter in input voltage but have two apart 5v in circuit?
that i use micro controller board and camera separately.
thanks

Hero999

  • Global Moderator
  • Electronics God
  • *****
  • Posts: 2613
    • View Profile
Re: circuit isolation
« Reply #1 on: February 23, 2012, 01:15:24 PM »
You could build your own dual 5V isolated PSU using a transformer with twin 9V secondaries and have a bridge rectifier, filtering capacitors and LM7805 on each secondary.