login
Digital Caliper Computer Interface can be used to log data on a spreadsheet. Report by Jeremy S. Cook @ blog.hackster.io
With a few pointers found here, he found that this data is transmitted in a continuous stream in 24 bits at 1.5 volts. He therefore level-shifted the 1.5V output to 3.3V and fed into a logic analyzer to further decode this data. With this worked out, input signals are fed into an ESP32 module on a special SAM32 board for the final(?) implementation, which also contains a Microchip SAM D51 microcontroller running CircuitPython. The SAM D51 handles sending the data to a computer, which is entered nicely into Excel!
Digital Caliper Computer Interface – [Link]
Please follow and like us:
RELATED POSTS
11 May, 2016 Analogue Sensors – Calculate the Nonlinearity Introduced by a Load or Pull Down Resistor
17 July, 2019 PC based Spectrometer using AS7265X spectrum sensors
11 April, 2016 How To Select a Capacitor
13 May, 2019 USB to -5V Negative Voltage DC-DC switching Converter
25 May, 2019 USB PD Controller from Diodes Supports Standard and Proprietary Protocols for Power Delivery
4 August, 2015 Pierce Crystal Oscillator Theory and Design
Subscribe
Login
0 Comments
