login
runtimeprojects.com has a quick review of the Digispark board. It’s a really interesting mini board that can be used in small projects using Arduino IDE.
In today’s blog post we’ll analyze one of the smallest and most practical boards out there. The Digispark board. It’s size, including the USB port, is 25mm x 18mm (so tiny)!! This little board is powered by an ATTINY85 chip and clocked to 16.5Mhz. For conveniece, it has a built in USB port and can be plugged into a your computer without cables or adapters. Now that’s pretty awesome! It is powered by either the USB port, from the +5v pin with regulated 5v or from VIN pin if unregulated. The VIN pin supports from 7v to 35v although less than 12v is recommended by the manufecturer.
Introduction to Digispark – [Link]
RELATED POSTS
18 January, 2022 Adafruit Unveils ESP32-C3 RISC V Developer Board For IoT Projects
13 March, 2020 Fotric 226B Thermal Camera For Automated, Non-Contact Personnel Temperature Screening
11 January, 2016 SerialUSB: A cheap USB proxy for input devices
15 April, 2023 Microchip’s MCP9700 and MCP9701 low-power linear active thermistor ICs provide a low-cost solution
6 September, 2019 Orange Pi Zero2 is a Tiny Allwinner H6 SBC with HDMI 2.0, USB 3.0, Ethernet & WiFi
11 March, 2022 Portescap Demonstrates Wide Variety of Miniature Medical Motor Technologies
