Arduino Interrupts Tutorial
https://www.electronics-lab.com/news/arduino-interrupts-tutorial/
In this video educ8s.tv is going to show us how to use interrupts with Arduino, an advanced but extremely useful feature of the Arduino. But what is an interrupt? Most microprocessors have interrupts. Interrupts let you respond to external events while doing something else. Suppose you are sitting at home waiting for the new ESP32 board, […]
Simple 3 phase Arduino energy meter
https://www.electronics-lab.com/news/simple-3-phase-arduino-energy-meter/
Simple 3 Phase Arduino energy meter from The DIY Life: Again, with this meter I was going for simplicity. Sure, for perfectly accurate measurements you need to measure both the supply current and voltage but for this application and in the interests of keeping the energy meter simple and safe – only requiring a non-contact […]
The New Arduino 101 (Genuino 101) – Unboxing, Set Up, and Comparing it to the Arduino Uno
https://www.electronics-lab.com/news/new-arduino-101-genuino-101-unboxing-set-comparing-arduino-uno/
Arduino’s newest board, the Arduino 101 is finally here… It has an Intel Curie processor, and an on-board gyroscope, accelerometer, and Bluetooth. Let’s see how it stacks up to the Uno, and find out what each of the components on the board do. At the end of the video, I go through setting it up […]
Hack Your Car With Macchina M2
https://www.electronics-lab.com/news/hack-car-macchina-m2/
Car hacking applications have been growing during the last few years, making it faster and cheaper to get into automotive tinkering. A new device was launched recently on kickstarter called M2 by Macchina. M2 is an open-source, versatile development platform which can be wired under the hood for a more permanent installation or plugged into the […]
Installing The Micronucleus Bootloader To An ATtiny Via Arduino
https://www.electronics-lab.com/news/installing-the-micronucleus-bootloader-to-an-attiny-via-arduino/
In order to be able to upload Arduino sketches directly to the ATtiny84 over USB without the need to use a programming device, Shawn Hymel, an electrical engineer at Sparkfun Electronics, had published a guide showing how to install the micronucleus bootloader, which supports virtual USB (V-USB), onto an ATtiny84 using Arduino. The Atmel AVR […]
Build Your Next IoT Device With GOBLIN 2
https://www.electronics-lab.com/news/build-next-iot-device-goblin-2/
Designed for industry, makers, and visionary students, Verse Technology presents GOBLIN 2, its new card with the best of Arduino technology. GOBLIN 2 is an IoT development board that unlocks the potential of the Internet of Things. It has been built based on the high-performance 16MHz ATmega328P microcontroller with a built-in SIM5320A connectivity module, and […]
Weather Station with a BME280 sensor and an LCD screen with Arduino Mega
https://www.electronics-lab.com/news/weather-station-bme280-sensor-lcd-screen-arduino-mega/
In this Arduino Project video educ8s.tv is going to build a simple weather station using a BME280 sensor and an LCD shield. Hello guys, I am Nick and welcome to educ8s.tv a channel that is all about DIY electronics projects with Arduino, Raspberry Pi, ESP8266 and other popular boards. Today we are going to take […]
DIY Arduino-Based Desktop CNC Router
https://www.electronics-lab.com/news/diy-arduino-based-desktop-cnc-router/
Inspired by machines like the Nomad 883 from Carbide3D, Carvey from Inventables and more, Thimo Voorwinden had come up with a new tutorial for building a desktop CNC router powered by Arduino. This CNC budget is around €200 and you don’t need a workshop to build it up, basic tools will do. It is designed to […]
Make Your Own Laser Scanning Microscope
https://www.electronics-lab.com/news/make-laser-scanning-microscope/
A laser scanning microscope (LSM) is an optical imaging technique for increasing optical resolution and contrast of micrographs. It permits a wide range of qualitative and quantitative measurements on difficult samples, including topography mapping, extended depth of focus, and 3D visualization. A laser microscope works by shining a beam of light on a subject in […]
Tinusaur, $3 ATtiny85 Microcontroller Board And Assembly Kit
https://www.electronics-lab.com/news/tinusaur-3-attiny85-microcontroller-board-assembly-kit/
Tinusaur is an Atmel ATtiny85 microcontroller board that comes in parts, as a kit, so you can solder it yourself and then program it. This small microcontroller board can run Arduino and its goal is to have a simple, cheap and quick-start platform for everyone interested in learning and creating things. Tinusaur comes as an […]