iCP12Q DAQduino, A Data Acquisition Board In Arduino Form
https://www.electronics-lab.com/news/icp12q-daqduino-data-acquisition-board-arduino-form/
iCircuit Technologies had produced the iCP12A DAQduino, an Arduino-like development board for signals monitoring, data acquisition and circuit troubleshooting at 1mSec/Samples period. The DAQduino board features a PIC18F2550 microcontroller with 14 digital I/O pins, two of them are PWM, and 6 input analog pins. With these IO ports, user can easily plug in different type […]
How to Build a Bi-Fuel (LPG & Unleaded) Trip Computer Using Arduino
https://www.electronics-lab.com/news/build-bi-fuel-lpg-unleaded-trip-computer-using-arduino/
Nikos Stavrou @ instructables.com build a bi-fuel trip computer using arduino and has a detailed tutorial on it. The computer can measure both LPG and unleaded fuel consumption. He writes: The main reason I made this project is the lack of a trip computer that is designed for LPG powered cars. I named it Bi-TripCo […]
Arduino Parking Assistant
https://www.electronics-lab.com/news/arduino-parking-assistant/
addictedToArduino @ instructables.com designed a Arduino based parking assistant. To appease my frustration I decided to design a device that would allow me to park in the exact spot every time. I love working with arduinos, leds, sensors, and nearly anything else electronic, so I knew from the start that it would probably end up […]
Niryo One, Your Next Affordable 6-Axis Robotic Arm
https://www.electronics-lab.com/news/niryo-one-next-affordable-6-axis-robotic-arm/
Two French engineers who are passionate about innovative use cases made out of new technologies and building accessible and collaborative robot, are now mixing last technology progresses in mechanics, electronics and computer science to deliver a new product: Niryo One! Niryo One is an accessible 6 axis robotic arm, made for makers, education, and small companies, […]
Getting Started With BTE13-010 – Arduino Mini Clone
https://www.electronics-lab.com/news/getting-started-bte13-010-arduino-mini-clone/
by techrm @ instructables.com This is a simple guide that will teach you how to get started with this cheap Arduino mini clone, covering all the steps one should do to make it work. Getting Started With BTE13-010 – Arduino Mini Clone – [Link]
Arduino 433Mhz RF Wireless Data Transfer
https://www.electronics-lab.com/news/arduino-433mhz-rf-wireless-data-transfer-2/
runtimeprojects.com has a tutorial on how to use 433Mhz modules to communicate between 2 Arduinos. The most practical and cool way of sharing data from 1 Arduino to another is by far using a radio transmitter and receiver. The simplest form of wireless transmission (I could find) is the 433Mhz ASK modules. They come in […]
How to Make an Arduino Capacitance Meter
https://www.electronics-lab.com/news/make-arduino-capacitance-meter/
circuitbasics.com has a tutorial on how to measure capacitance using arduino. With all the different ways capacitors are labeled, figuring out the values of your capacitors can be challenging. Especially if you don’t have a digital multi-meter to test them. In this tutorial, I’ll show you how to build three different capacitance meters using an Arduino and a couple […]
Start with Arduino in 15 minutes
https://www.electronics-lab.com/news/start-arduino-15-minutes/
The ultimate Arduino tutorial for beginners. Learn what Arduino is, how to choose an Arduino, then build a simple data logger, LED dimmer and motor speed controller. Start with Arduino in 15 minutes – [Link]
Arduino-Programmable ESP32 Development Board
https://www.electronics-lab.com/news/arduino-programmable-esp32-development-board/
Ezsbc, an American embedded control solutions retailer, had produced a new development board that simplifies working with ESP32 module and makes it programmable via USB using the Arduino IDE. The ESP32 is a low cost, ultra low power microcontroller with integrated Wi-Fi & dual-mode Bluetooth, which employs a dual-core Tensilica Xtensa LX6 microprocessor. ESP32 is […]
Premier Farnell partners with Intel on IoT
https://www.electronics-lab.com/news/premier-farnell-partners-intel-iot/
Farnell element14’s tinyTILE is an Intel Curie module based board created by the distributor in partnership with Intel. by Julien Happich @ edn-europe.com: Measuring only 35x26mm, the tinyTILE has been specifically designed for use in wearable and IoT designs for consumer and industrial edge products. It runs a software platform created specifically for the Intel […]