Sound to Light Effect
https://www.electronics-lab.com/project/sound-to-light-effect/
Audio Dancing LED project is a fun filled project which generates a LED dancing sequence depending on the audio level it senses. This project is based on one of the VU Meter IC LB1403 or CA1403 Specifications Power supply input 6 to 9 VDC Output 5 LED’s Onboard preset to adjust audio level to the […]
Arduino Motorized SMT Solder Paste Dispenser
https://www.electronics-lab.com/arduino-motorized-smt-solder-paste-dispenser/
by zapta @ thingiverse.com: This is a motorized solder paste dispenser for soldering SMT boards. The home directory of this project is on github here https://github.com/zapta/misc/tree/master/paste_injector and it include hardware and firmware design of a compatible controller board that is Arduino compatible (it looks to the Arduino IDE as an Arduino Pro Mini). Arduino Motorized SMT […]
SOS webinar – Simple and efficient solution for wide voltage range applications
https://www.electronics-lab.com/sos-webinar-simple-and-efficient-solution-for-wide-voltage-range-applications/
LINEAR TECHNOLOGY Term: 2015.11.25 10:00 – 11:30 CET Learn more about available topologies for input voltage higher and lower from output level. Focus on the most efficient way to convert power in four-switch buck-boost topology. available topologies of Vin min < Vout < Vin max and differences between them four-switch buck-boost topology as the most […]
Warning LED Flash Light
https://www.electronics-lab.com/warning-led-flash-light/
LED Flasher is a simple project producing a flashing effect of six LED’s. This project can be used in all areas where you want to draw attention. Hi-glow LED’s providing enough flashing light to attract your attention. Can be used as warning light. Specifications Supply input 12 V @ 35 mA (6 to 15V Dc […]
Warning LED Flash Light
https://www.electronics-lab.com/project/warning-led-flash-light/
LED Flasher is a simple project producing a flashing effect of six LED’s. This project can be used in all areas where you want to draw attention. Hi-glow LED’s providing enough flashing light to attract your attention. Can be used as warning light. Specifications Supply input 12 V @ 35 mA (6 to 15V Dc […]
Kicad StepUp – export kicad 3D board
https://www.electronics-lab.com/kicad-stepup-export-kicad-3d-board/
kicad StepUp allows exporting kicad 3D board and comps in STEP AP214 .By easyw @ sourceforge.net: kicad StepUp: a new approach to export kicad board and modules in STEP AP214 (with colors). With kicad StepUp, it is possible to work in kicad EDA with the same component model data available in the STEP AP214 3D format, […]
Pixie – 3W chainable smart LED Pixel
https://www.electronics-lab.com/pixie-3w-chainable-smart-led-pixel/
Ytai Ben-Tsvi @ ytai-mer.blogspot.com build a PIC based 3W LED Driver that is chainable. He writes: LED Pixel: The Pixie is a color LED module, allowing an external controller to change its color and brightness dynamically. Chainable: The module is designed so that you can chain many of them and control each one individually. If you […]
DC Servo Motor Driver – Analog Closed Loop Control
https://www.electronics-lab.com/dc-servo-motor-driver-analog-closed-loop-control/
Versatile project has been designed to use in automotive application and industrial servo control application. This project provides all active necessary functions for closed loop servo system using Brushed DC Motor and potentiometer mounted on output shaft of DC Motor Gear. This project is ideally suited for almost any servo positioning application. Features POWER SUPPLY: […]
DC Servo Motor Driver – Analog Closed Loop Control
https://www.electronics-lab.com/project/dc-servo-motor-driver-analog-closed-loop-control/
Versatile project has been designed to use in automotive application and industrial servo control application. This project provides all active necessary functions for closed loop servo system using Brushed DC Motor and potentiometer mounted on output shaft of DC Motor Gear. This project is ideally suited for almost any servo positioning application. Features POWER SUPPLY: […]
DRV8871 – 3.6A Brushed DC Motor Driver
https://www.electronics-lab.com/drv8871-3-6a-brushed-dc-motor-driver/
The DRV8871 is a brushed-DC motor driver for printers, appliances, industrial equipment, and other small machines. Two logic inputs control the H-bridge driver, which consists of four N-channel MOSFETs that can control motors bidirectionally with up to 3.6-A peak current. The inputs can be pulse-width modulated (PWM) to control motor speed, using a choice of […]