JIGMOD Electronic Circuit Building System
https://www.electronics-lab.com/jigmod-electronic-circuit-building-system/
Succeed with your Innovations by building reliable, high quality electronic circuits. by JIGMOD: Most electronic components aren’t compatible with breadboards. JIGMOD bridges the gap between those components and your breadboard. Don’t work hard – work smart! Avoid wasted time spent debugging and troubleshooting. Be amongst the first to use this revolutionary development platform. Develop circuits with […]
Humidity sensor using 8051
https://www.electronics-lab.com/humidity-sensor-using-8051/
by circuitstoday.com: This project is about a simple humidity sensor based on 8051 microcontroller. Humidity sensor is also called hygrometer. This circuit can sense relative humidity (RH) from 20% to 95% at an accuracy of 5%. The humidity information is displayed on a 16×2 LCD display. A relay is also provided which is set to be […]
3D Print the Ultimate Helping Hands for a PCB Workstation
https://www.electronics-lab.com/3d-print-the-ultimate-helping-hands-for-a-pcb-workstation/
by Giuseppe Finizia @ makezine.com: I am the Senior Analyst of the Electronic Forensics Unit of the Carabinieri (Italian Military Police) and I deal with technical investigations on seized electronic devices. I spend most of my day in a well-equipped electronic laboratory, but I was lacking a tool for performing technical assessments on printed circuit boards […]
Multifunction biosensor/vital signs monitor for wearables, from ams
https://www.electronics-lab.com/multifunction-biosensorvital-signs-monitor-for-wearables-from-ams/
by Graham Prophet @ edn-europe.com: Sensor and mixed-signal IC specialist ams (Graz, Austria) has applied optical detection techniques to produce a sensor capable of accurate heart rate measurement; the company says its device is the first “total solution for 24/7 heart rate measurement for wearables”. AS7000 is the first in what is to be a family […]
DIY Motorized Combo Lock Cracking Device
https://www.electronics-lab.com/diy-motorized-combo-lock-cracking-device/
Combo Breaker is a motorized, battery powered, 3D printed, Arduino-based combination lock cracking device. It is portable, open source, 3D models provided, and exploits a new technique I’ve discovered for cracking combination locks in 8 attempts or less, but in an even more exciting, automated fashion. DIY Motorized Combo Lock Cracking Device – [Link]
Solar Cells Made Obsolete – 3D rectennas aim at 40-to-90% efficiency
https://www.electronics-lab.com/solar-cells-made-obsolete-3d-rectennas-aim-at-40-to-90-efficiency/
R. Colin Johnson @ eetimes.com: PORTLAND, Ore.–Now before you get all excited by the headline, which is not click-bait according to the researchers, a new kind of nanoscale rectenna (half antenna and half rectifier) can convert solar and infrared into electricity, plus be tuned to nearly any other frequency as a detector. The invention was made […]
Samsung launches industry’s first 12Gb LPDDR4 DRAM
https://www.electronics-lab.com/samsung-launches-industrys-first-12gb-lpddr4-dram/
by Samsung: Samsung Electronics announced that it is mass producing the industry’s first 12-gigabit (Gb) LPDDR4 (low power, double data rate 4) mobile DRAM, based on its advanced 20-nanometer (nm) process technology. The newest LPDDR4 is expected to significantly accelerate the adoption of high capacity mobile DRAM worldwide. The 12Gb LPDDR4 brings the largest capacity and […]
One case – over 100 possibilities of usage
https://www.electronics-lab.com/one-case-over-100-possibilities-of-usage/
We speak about the practical case CTK110EU full of high quality CrV tools sufficient for majority of common operations. CTK110EU tools set might be easily called as “all-in-one”. Naturally, such all-in-one solution won´t help in all situations which we may face at production or servicing, but very probably it is more than suitable for a […]
Laser Data Transmission
https://www.electronics-lab.com/laser-data-transmission/
Lasers have been one of the essential technologies used in industries. It is realized that light outperforms radio in terms of speed and density. It has been used for communications whether in scanning barcodes, reading CD’s and DVD’s. This design is a simple data transmitter that uses a DIP switch to support the transmission of […]
Making a PCB business card
https://www.electronics-lab.com/making-a-pcb-business-card/
Ilia Baranov has designed a reference business card: Back of card includes: Ruler in both 1/10″ and mm. AWG Hole size gauge (not super accurate due to plating, but that is unavoidable) Resistor/capacitor/inductor/diode sizes Common surface mount component sizes Common electrical symbols and shortcuts/equations Common conversions Trace size comparison Quote from Dune! Making a PCB […]