Audio Oscillator with Frequency Counter
https://www.electronics-lab.com/project/audio-oscillator-with-frequency-counter/
This project is not completely new. In fact, the oscillator is made from the same schematic as in one of my previous projects and only the frequency counter is made with different schematic. After I finished the oscillator, I made some minor changes in the square signal part of the schematic. I connected five of […]
Automotive Chip-On-Glass LCD Dot Matrix Driver
https://www.electronics-lab.com/automotive-chip-on-glass-lcd-dot-matrix-driver/
The automotive products are quite recognized nowadays. It brings high demand on automotive chip and other related electronic devices. These demands are diverse, which brings difficulties to automotive developers. In this design, users are provided a modifiable firmware using In-System/In-Application Programming (ISP/IAP) via USB. It features the Vertical Alignment (VA) Chip-On-Glass (COG) display module with […]
DIY USB Line Power Meter Stick
https://www.electronics-lab.com/diy-usb-line-power-meter-stick/
a new project is published on electro-labs.com, check it out: Another DIY project designed with FabStream’s SoloPCB tool is ready to be shared with Electro-Labs community. This is an USB stick which measures the supply voltage of the USB port and current drawn by the device connected to the port over the stick. Then it calculates […]
National Instruments VirtualBench Review, Teardown & Experiments
https://www.electronics-lab.com/national-instruments-virtualbench-review-teardown-experiments/
In this episode Shahriar gets a hold of a National Instruments VirtualBench! This instrument combines a mixed-signal oscilloscope, function generator, digital multimeter, programmable power supply and digital I/Os in one compact and portable unit. The teardown of the unit reveals a two-board construction with a core single processor which handles all instrument functionality simultaneously. The […]
DIY Smart Plant pot
https://www.electronics-lab.com/diy-smart-plant-pot/
by Akin Yildiz @ instructables.com: it was one year ago that i have published the plant pot – world’s first stand alone smart plant pot that can email you when it’s thirsty, cold, hot, sleeping etc. a lot has changed since the first release. today I would like to share with you our latest and most […]
Specan – A reboot of the W7ZOI/K7TAU spectrum analyzer
https://www.electronics-lab.com/specan-a-reboot-of-the-w7zoik7tau-spectrum-analyzer/
An easy to build spectrum analyzer for the homebrewers. Specan – A reboot of the W7ZOI/K7TAU spectrum analyzer – [Link]
Analog to Digital Converter module
https://www.electronics-lab.com/analog-to-digital-converter-module/
This simple A2D (Analog to Digital) Converter Board can log upto 8 channel of analog signal with 8 bit resolution. This board uses the ADC0808 chip from National Semiconductor. Analog to Digital Converter module – [Link]
0-20V Bargraph Voltmeter
https://www.electronics-lab.com/0-20v-bargraph-voltmeter/
0 – 20V LED Voltmeter kit displays the voltage of the source using 20 LED’s. This projects is based on the famous LM3914 IC from National Semiconductor. Power Supply Input: 5 VDC Max @ 30 mA in DOT mode and 300 mA in BAR mode 0-20V Bargraph Voltmeter – [Link]
0-20V Bargraph Voltmeter
https://www.electronics-lab.com/project/0-20v-bargraph-voltmeter/
0 – 20V LED Voltmeter kit displays the voltage of the source using 20 LED’s. This projects is based on the famous LM3914 IC from National Semiconductor. Power Supply Input: 5 VDC Max @ 30 mA in DOT mode and 300 mA in BAR mode Specifications Output: 20 LED’s Range selectable with onboard preset 2 […]
Riverdi TFT display with FT801 controller
https://www.electronics-lab.com/riverdi-tft-display-with-ft801-controller/
If you are looking for a touchscreen LCD display for your next project you should take a look at Riverdi LCD solutions. Their aim is to produce innovative, high quality LCD solutions at affordable prices. They were kind enough to send us a sample of a FTDI FT801 controller LCD display along with their […]