Externally clocking (and overclocking) AVR MCUs
https://www.electronics-lab.com/news/externally-clocking-and-overclocking-avr-mcus/
by nerdralph.blogspot.ca: People familiar with AVR boards such as Arduinos likely know most AVR MCUs can be clocked from an external crystal connected to 2 of the pins. When the AVR does not need to run at a precise clock frequency, it is also common to clock them from the internal 8Mhz oscillator. Before CPUs were […]
ESP8266 Weather Station with Arduino
https://www.electronics-lab.com/news/esp8266-weather-station-with-arduino/
by ohneschuh @ instructables.com: I read about the ESP8266 first in March this year and I didn’t know what to do with. And now I’m really fascinated how easy the connection of an Arduino to the Internet can be. Like others I set up a weather station on a breadboard first and sent data to thingspeak.com. […]
Pierce Crystal Oscillator Theory and Design
https://www.electronics-lab.com/news/pierce-crystal-oscillator-theory-and-design/
The theory and practical design of a 28MHz discrete Pierce crystal oscillator. Pierce Crystal Oscillator Theory and Design – [Link]
ATMEGA16/32 DEVELOPMENT BOARD
https://www.electronics-lab.com/news/atmega1632-development-board/
ATmega16/32 Development Board provides a very simple and cost effective platform for prototyping solution. The compact design provides connection to all the pins of the microcontroller for the user. Prototyping solution available for 40-pin ATmega series AVR microcontroller from ATMEL All the four ports available to the user via standard 10 pin box header connector […]
GLCD MODULE
https://www.electronics-lab.com/news/glcd-module/
GLCD Adapter Board offers an easy way to interface a standard GLCD to your project. GLCD MODULE – [Link]
ATmega16/32 Development Board
https://www.electronics-lab.com/project/atmega1632-development-board/
ATmega16/32 Development Board provides a very simple and cost effective platform for prototyping solution. The compact design provides connection to all the pins of the microcontroller for the user. Prototyping solution available for 40-pin ATmega series AVR microcontroller from ATMEL All the four ports available to the user via standard 10 pin box header […]
GLCD Module
https://www.electronics-lab.com/project/glcd-module/
GLCD Adapter Board offers an easy way to interface a standard GLCD to your project. 5 VDC supply sourced through the interfacing Box Header connector Two separate box header connector available for interfacing of data bus and control bus to the interfacing unit On Board Contrast control Preset also available PCB dimensions 52 mm […]
Narrowband RF Power Amplifier (520MHz)
https://www.electronics-lab.com/news/narrowband-rf-power-amplifier-520mhz/
The RF power amplifier stage is usually the final active block of any electronic system that is transmitting RF power. Relatively low power RF signals are amplified to produce a more powerful signal in order to be transmitted over greater distance. RF output power can range from a few mW to MW, depend by application. […]
LDO regulator is qualified for automotive designs
https://www.electronics-lab.com/news/ldo-regulator-is-qualified-for-automotive-designs/
by Susan Nordyk @ edn.com: Housed in a tiny 2×2-mm, 6-pin DFN package, the MAQ5300 voltage regulator from Micrel boasts a dropout of only 100 mV at 300 mA. The AEC-Q100-qualified part is suitable for space-constrained and high-reliability applications that are subjected to the harsh environments and temperatures commonly encountered in automotive and industrial applications. The […]
ESP8266 MQTT battery monitor project
https://www.electronics-lab.com/news/esp8266-mqtt-battery-monitor-project/
Steve’s latest project, a wireless MQTT battery monitor: This board uses an ESP8266 (ESP12), a Texas Instruments INA226 I2C voltage and current monitor, and a Texas Instruments LMR12010X buck converter. This board is designed to wirelessly monitor 12 volt batteries and power supplies using an external current shunt resistor. The voltage across the shunt resistor […]