DFRobot 0.96″ 160×80 Color SPI TFT Display
https://www.electronics-lab.com/dfrobot-0-96-160x80-color-spi-tft-display/
DFRobot 0.96″ 160×80 Color SPI TFT Display employs an edge-to-edge design and offers a 160×80HD 16-bit color display. The display is suitable for wearable projects, mobile devices, and smart home products. It supports the DFRobot GDI display interface and can be conveniently connected to a GDI main-controller with FPC, plug, and play, and is easy […]
Texas Instruments TPS1HB08-Q1 Smart High-Side Switch
https://www.electronics-lab.com/texas-instruments-tps1hb08-q1-smart-high-side-switch/
Texas Instruments TPS1HB08-Q1 Smart High-Side Switch is intended for use in 12V automotive systems. The device integrates robust protection and diagnostic features to ensure output port protection, even during harmful events like short circuits in automotive systems. The device protects against faults through a reliable current limit, which, depending on the device variant, is adjustable […]
TPSM63606 High-Density 6 A Power Module
https://www.electronics-lab.com/tpsm63606-high-density-6-a-power-module/
Texas Instruments’ module is a highly-integrated 36 V DC/DC solution that comes in an enhanced HotRod™ QFN package Texas Instruments’ TPSM63606 is a highly integrated 6 A, DC/DC synchronous buck power module that combines power MOSFETs, a shielded inductor, and passives in an enhanced HotRod QFN package. The module has pins for VIN and VOUT that are […]
Analog Devices LT8333 Current-Mode DC-DC Converter
https://www.electronics-lab.com/analog-devices-lt8333-current-mode-dc-dc-converter/
Analog Devices Inc. LT8333 Current-Mode DC-DC Converter integrates a 40V, 3A power switch and operates from a 2.8V to 40V input. With a unique single feedback pin architecture, this device is capable of Boost, SEPIC, or inverting configurations. Burst Mode® operation consumes as low as 9μA quiescent current to maintain high efficiency at very low output […]
High Current MOSFET Based Power Switch with Gate Driver
https://www.electronics-lab.com/high-current-mosfet-based-power-switch-with-gate-driver/
This power load switch project provides a simple and inexpensive method for power control. It is intended for driving a resistive or inductive load. A TTL logic signal from the system turns the load switch ON and OFF. The project consists of a low ohm N-Channel Power Trench MOSFET FDB0300N1007L and Gate driver MAX5048 chip. […]
Single Key Touch Sensor using LM2907
https://www.electronics-lab.com/single-key-touch-sensor-using-lm2907/
This is a single key device featuring a touch ON (Momentary) output. The project is built using the LM2907 chip. The board provides stable sensing and has a wide working power supply range 5V to 12V DC and consumes 20mA. D1 power LED, D2 function LED. Touch sensors are used in many applications, from remote […]
End-to-End Circuit Testing Using Zoolark
https://www.electronics-lab.com/zoolark-testing-circuits/
Zoolark is a lean integrated implementation of Function Generators and Oscilloscopes. It is extremely handy for testing circuits without waiting in line for the high-end equipment at the lab. The use of function generators and Oscilloscopes is to test circuits in an isolated environment. A function generator mimics the real expected input. Oscilloscope records the […]
Valentine’s Day Large LED Heart PCB
https://www.electronics-lab.com/valentines-day-large-led-heart-pcb/
A large heart with 20 individually controllable LEDS using 4 pins on an ATtiny 45 with Charlieplexing This is an easy to solder project, as all components are trough hole, except for the large and easy to solder battery holder Who would not like to be pledged eternal love to by their valentine giving them […]
High Current MOSFET Based Power Switch with Gate Driver
https://www.electronics-lab.com/project/high-current-mosfet-based-power-switch-with-gate-driver/
This power load switch project provides a simple and inexpensive method for power control. It is intended for driving a resistive or inductive load. A TTL logic signal from the system turns the load switch ON and OFF. The project consists of a low ohm N-Channel Power Trench MOSFET FDB0300N1007L and Gate driver MAX5048 chip. […]
Single Key Touch Sensor using LM2907
https://www.electronics-lab.com/project/single-key-touch-sensor-using-lm2907/
This is a single key device featuring a touch ON (Momentary) output. The project is built using the LM2907 chip. The board provides stable sensing and has a wide working power supply range 5V to 12V DC and consumes 20mA. D1 power LED, D2 function LED. Touch sensors are used in many applications, from remote […]