3 Digit Common Cathode 0.5″ – 7 Segment Display Module (Multiplexed)
https://www.electronics-lab.com/project/3-digit-common-cathode-0-5-7-segment-display-module-multiplexed/
This is a 3 Digit 7-segment display project that contains 3 x Common Cathode displays, current limiting resistors or each LED segment, 3 x PNP Transistor on each common cathode for multiplexing etc. The project works with 5V TTL signals but can be optimized for 3.3V operations by reducing the current limiting resistors’ value. A […]
Rohde & Schwarz adds new frequency ranges to its portable all-rounder spectrum analyzers
https://www.electronics-lab.com/rohde-schwarz-adds-new-frequency-ranges-to-its-portable-all-rounder-spectrum-analyzers/
New base models for the portable R&S FPL1000 take spectrum and signal analysis capabilities up to 26.5 GHz. They combine the functionality of benchtop instruments and the portability of a handheld instrument, with intuitive features to make high-performance measuring on the go fast and simple. The R&S FPL1000 spectrum analyzer combines the functionality of benchtop […]
Teledyne LeCroy’s LCR meters are compact and are equipped with diverse measurement functionalities
https://www.electronics-lab.com/teledyne-lecroys-lcr-meters-are-compact-and-are-equipped-with-diverse-measurement-functionalities/
Teledyne LeCroy’s T3LCR series of high-precision LCR meters offers three models with a maximum test frequency ranging from 2 kHz to 300 kHz and basic accuracy of 0.05%. The T3LCR meters are compact and are equipped with diverse measurement functionalities, making them an excellent choice in meeting the requirements of R&D, component assessment for engineering […]
TFT display module features contrast ratio of 900:1
https://www.electronics-lab.com/tft-display-module-features-contrast-ratio-of-9001/
An 11.6-inch Tianma TFT display module is in stock at distributor Review Display Systems (RDS). The TM116VDSP02 features Full HD (1920 x 1080 pixels) resolution, a 16:9 wide aspect ratio, a high brightness rating, and exceptional optical performance characteristics. Ideal for use in high ambient light and outdoor environments, the Tianma TM116VDSP02 is manufactured with […]
Lynred boosts thermal sensitivity across range of 12-micron infrared detectors
https://www.electronics-lab.com/lynred-boosts-thermal-sensitivity-across-range-of-12-micron-infrared-detectors/
Lynred has announced enhanced capabilities across the range of its 12µm infrared detectors, to enable optronic systems to more accurately identify objects in low-contrast scenes. These 12 µm pixel pitch infrared detectors, based on a microbolometer technology, come with enhanced thermal sensitivity, permitting use in limitless applications. Applications include integration into outdoor leisure equipment for […]
GeneSiC Semiconductor 3300V SiC MOSFETs
https://www.electronics-lab.com/genesic-semiconductor-3300v-sic-mosfets/
GeneSiC Semiconductor 3300V SiC MOSFETs offer fast and efficient switching with reduced ringing in an optimized package with a separate driver source pin. The 3300V SiC MOSFETs are designed to be compatible with commercial gate drivers and provide ease of paralleling without a thermal runaway. The 3300V SiC MOSFETs deliver low conduction losses at all […]
MangoPi-MQ1, a RISC-V Linux Capable Dev Board For Allwinner D1s Is Coming Soon For Under $10
https://www.electronics-lab.com/mangopi-mq1-a-risc-v-linux-capable-dev-board-for-allwinner-d1s-is-coming-soon-for-under-10/
Cost and size are two things you consider when choosing components for portable systems, after functionality and performance. Not too long ago, we saw the Sipeed’s Lichee RV that was launched for about $20 and designed to compete with the $99 Nezha SBC. Now, MangoPi has released an open-source development board called MangoPi-MQ which sells […]
Create BLE project with STM32 and BleuIO
https://www.electronics-lab.com/create-ble-project-with-stm32-and-bleuio/
1. Introduction The project is a simple example showcasing a quick way to set up a STM32Cube project as a USB CDC Host capable of communicating with the BleuIO Dongle. When a BleuIO Dongle is connected to the Nucleo boards USB port the STM32 will recognize it. It will then accept 3 different inputs from […]
SnapEDA Desktop App is now available for Windows
https://www.electronics-lab.com/snapeda-desktop-app-is-now-available-for-windows/
What is the SnapEDA Desktop App? SnapEDA mission is to help engineers build products faster by removing design barriers. This is why they created the SnapEDA Desktop App. It allows our engineers to place parts seamlessly into their CAD tools in a Snap. Follow these steps to install the app on Windows: Extract the downloaded […]
Access BLE data remotely
https://www.electronics-lab.com/access-ble-data-remotely/
Suppose you have some BLE devices at your home and want to control or scan for those devices while at your workplace. In this project, we will discuss how to access BLE data remotely. We have already created a script that communicates through BleuIO dongle remotely and gives us the response. You can access the […]