Twisted-Pair Cable-CAT5 – Composite Video Differential Receiver Amplifier
https://www.electronics-lab.com/project/twisted-pair-cable-cat5-composite-video-differential-receiver-amplifier/
The circuit presented here is a high frequency differential line receiver amplifier which has excellent common-mode rejection at its inputs. The project is an ideal solution for a receiver for composite video signals that are transmitted over long distance on twisted-pair cables like CAT5. Category 5 cables are very common in office settings and are […]
Pull-up Resistors
https://www.electronics-lab.com/article/pull-up-resistors/
Pull-up Resistors Pull-up resistors are used to avoid self-biasing or floating digital inputs. The pull-up resistor connects the digital input to the correct biasing level and eliminates the uncertainty caused by a floating input. A floating input creates a no input condition and may cause random biasing leading to incorrect logic or decision. A logic […]
ELECTRONIC ASSEMBLY W09616 0.84” Micro OLED Displays
https://www.electronics-lab.com/electronic-assembly-w09616-0-84-micro-oled-displays/
ELECTRONIC ASSEMBLY W09616 0.84” Micro OLED Displays are 96 x 16 dot matrix displays with a 0.22mm pixel pitch that consume low power of 15mA. These OLED displays are capable of offering bright white content with unlimited viewing angles. The W09616 micro OLED displays come included with an SSD1306B controller and feature a 10µs fast response […]
Analog Devices Inc. ADG7421F Dual Single-Pole/Single-Throw Switch
https://www.electronics-lab.com/analog-devices-inc-adg7421f-dual-single-pole-single-throw-switch/
Analog Devices Inc. ADG7421F Dual Single-Pole/Single-Throw Switch features overvoltage protection, power-off protection, and overvoltage detection on the source pins. When no power supplies are present, the switch remains in the off condition, and the switch inputs are high impedance. When powered, if the analog input signal levels on the Sx pins exceed VDD or VSS by […]
UDOO Key Unveils a Flexible AI Platform that Combines Raspberry Pi RP2040 and ESP32
https://www.electronics-lab.com/udoo-key-unveils-a-flexible-ai-platform-that-combines-raspberry-pi-rp2040-and-esp32/
There’s more to AI than supercomputers and the big things that we often think about when AI is mentioned. Sometimes it is more about bringing AI technology to everyday objects around us and helping people augment what they have in their homes. This is why several companies now look for new ways life can be […]
Review: Toit IoT Cloud Development Platform
https://www.electronics-lab.com/review-toit-iot-cloud-development-platform/
Toit has everything you’ll need to build an IoT application, including firmware, cloud connectivity, a web-based console, and even a new programming language with Python-like syntax but considerably quicker execution speeds. But more importantly, Toit provides container-based development for the ESP32, allowing applications to be installed and updated independently from one another, as well as […]
Leetop A205 – NVIDIA Jetson Nano/Xavier NX carrier board with Dual Gigabit Ethernet, 5 SATA, 6 CSI camera and Support for 4G
https://www.electronics-lab.com/leetop-a205-nvidia-jetson-nano-xavier-nx-carrier-board-with-dual-gigabit-ethernet-5-sata-6-csi-camera-and-support-for-4g/
Leetop has introduced a high-performance, interface-rich NVIDIA Jetson Nano / Xavier NX compatible carrier board named Leetop A205. Leetop A205 comes with HDMI 2.0 output, GbE, microSD card, USB3.0, USB 2.0, M.2 key E Wifi / BT, M.2 key M, SATA, CSI camera, RS232, SD card, CAN, I2C, I2S, and fans, just to mention a few. […]
Transfer files wirelessly over the Bluetooth Low Energy protocol Using BleuIO
https://www.electronics-lab.com/transfer-files-wirelessly-over-the-bluetooth-low-energy-protocol-using-bleuio/
This tutorial will show how to transfer files wirelessly over the Bluetooth Low Energy protocol. We will use two BleuIO dongles for this project—one for sending and another one for receiving. The sender dongle will be in central mode, while the receiver dongle will be in peripheral mode. We have already created two python scripts […]
Fibocom Extends Leadership in 5G FWA Market with FG360-NA Module Certified by US Major Carrier
https://www.electronics-lab.com/fibocom-extends-leadership-in-5g-fwa-market-with-fg360-na-module-certified-by-us-major-carrier/
Fibocom, a global leading provider of IoT (Internet of Things) wireless solutions and wireless communication modules, announces that its 5G module FG360-NA has been successfully certified by a US major carrier. The module is now qualified to provide wireless connection services under the US 5G network, which accelerate the deployment of 5G FWA (Fixed Wireless […]
iW-RainboW-G34S: i.MX 8M Mini Single Board Computer
https://www.electronics-lab.com/iw-rainbow-g34s-i-mx-8m-mini-single-board-computer/
Adding another feather to the extensive portfolio of NXP® i.MX-based Single board Computers, iWave recently launched the iW-RainboW-G34S, a single board computer based on NXP i.MX 8M Mini applications processor in a PICO-ITX form factor. iWave supports Linux 5.4.70, Ubuntu 20.04, Buildroot 2021.02 and Android 11 on the platform, supported with an extensive BSP support […]