RD6006 Digital Control Switch Adjustable Power Supply starts from just $57
https://www.electronics-lab.com/news/rd6006-digital-control-switch-adjustable-power-supply-starts-from-just-57/
The good life, they say, sometimes does not cost a fortune, with the new RD6006 from Ruideng, you can precisely program the amount of power needed for your project via USB / WiFi communication or via the embedded control panel. The RD6006 digital control Switching Adjustable power supply is a programmable, DIY Flavoured, bench PSU […]
DC205 – Precision DC voltage source
https://www.electronics-lab.com/news/dc205-precision-dc-voltage-source/
The DC205 low-noise, high-resolution DC voltage source is the right tool when a precision bias source is needed. Its bipolar, four-quadrant output delivers up to 100 V with 1 µV resolution and up to 50 mA of current. In 4-wire mode (remote sense), the instrument corrects for lead resistance delivering accurate potential to your load. […]
Adjustable Constant Current LASER Diode/LED driver
https://www.electronics-lab.com/project/adjustable-constant-current-laser-diode-led-driver/
I was testing a couple of low-cost laser diodes that come from china and I was wondering why those diodes don’t have any protection/driver circuitry. Those diodes come with a simple series resistor for current control which is not a good idea nor stable. Laser diodes are harmful and should have some sort of constant […]
Microchip MCP2518FD : External CAN FD Controller with SPI Interface
https://www.electronics-lab.com/news/microchip-mcp2518fd-external-can-fd-controller-with-spi-interface/
The MCP2518FD is a cost-effective and small-footprint External CAN FD Controller that can be easily added to a microcontroller with an available SPI interface. Therefore, a CAN FD channel can be easily added to a microcontroller that is either lacking a CAN FD peripheral or that doesn’t have enough CAN FD channels. The MCP2518FD supports […]
Delta T31SN 100W DC/DC family in compact 1/32 brick format
https://www.electronics-lab.com/news/delta-t31sn-100w-dc-dc-family-in-compact-1-32-brick-format/
T31SN series of 1/32 Brick, 9~53V input, single output, non-isolated DC/DC converters, are the latest offering from a world leader in power systems technology and manufacturing ― Delta Electronics, Inc. This product family provides up to 100 watts of power or 8A of output current. With creative design technology and optimisation of component placement, these […]
Meet the Tigard Board; A new FT2232H-Based USB Serial Adapter/Debuggers
https://www.electronics-lab.com/news/meet-the-tigard-board-a-new-ft2232h-based-usb-serial-adapter-debuggers/
SecurityHardware.com is set to take FT2232H-based USB Serial Adapters and Debuggers to the Next Level. The Portland-based company will soon be launching a Crowdfunding campaign for its latest design, an open-source FTDI FT223H-based multi-protocol, multi-voltage hardware hacking device called Tigard. Tigard is a one-stop board for developers looking for something a little more than the […]
Launchpad Launches as a Cheap Arduino Nano alternative
https://www.electronics-lab.com/news/launchpad-launches-as-a-cheap-arduino-nano-alternative/
We can’t seem to get enough of Arduino Nano. It has been a “go to” boards for developers since its launch in 2008. We see developers and engineers try to upgrade the Arduino. This has moved Clyde D. Corpuz to launch the Launchpad, which is a small, Arduino compatible microcontroller development board that does away with […]
Developer Board 4 V3 – Embedded Platform based on Qualcomm Snapdragon 410E SoC
https://www.electronics-lab.com/news/developer-board-4-v3-embedded-platform-based-on-qualcomm-snapdragon-410e-soc/
Developer Board 4 V3 is a single board computer based on Qualcomm Snapdragon 410E SoC with 2GB DDR3, 16GB EMMC, HDMI, MIPI-CSI, 40- and 60-pin expansion connectors. Fully structurally compatible with the 96boards CE standard.It features advanced processing power, WLAN, Gigabit Ethernet, Bluetooth, GPS, all packed into a board the size of a credit card.The […]
nRF9160 Feather Launches For $99 With GPS Support
https://www.electronics-lab.com/news/nrf9160-feather-launches-for-99-with-gps-support/
The nRF9160 Feather by Jared Wolff (aka Circuit Dojo LLC) is an electronics development board, which is a system-in-package part of nRF91 series that enables NB-IoT and eMTC (LTE-M) IoT connectivity, as well as assisted GPS. The package is available in an Adafruit Feather form factor. nRF9160 Feather board supports both CAT M1 LTE and NB-IoT […]
Free Elektor Article: The RV-3029-C2 “Swiss Clock”
https://www.electronics-lab.com/news/free-elektor-article-the-rv-3029-c2-swiss-clock/
Off-air awfully accurate drop-in RTC & calendar on I²C This RTC & Calendar board is built around Micro Crystal’s type RV-3029-C2 integrated circuit. The ‘3029 is a real-time-clock/calendar (RTC) cheerfully communicating via the I2C protocol. It offers good precision out of the box, and fine precision when tweaked. Features: Micro Crystal RV-3029-C2 RTC/Calendar chip Battery […]