Red Pitaya launches the STEMlab 250-12
https://www.electronics-lab.com/red-pitaya-launches-stemlab-250-12/
Red Pitaya has launched a high-end STEMlab platform – STEMlab is a test and measurement environment designed to provide a low-cost alternative to many expensive measurement and control instruments. STEMlab 250-12 offers enhanced hardware performance, complete software control and additional hardware features over STEMlab-125 products, and is designed to meet the needs of more demanding users for […]
Meet the PX-Hero, an ARM Cortex-M0+ Based Development Board for Embedded Systems Education
https://www.electronics-lab.com/meet-px-hero-arm-cortex-m0-based-development-board-embedded-systems-education/
Piconomix, the South-Africa based Embedded systems development company, has launched a campaign on Crowdsupply for a new board called; PX-Hero. The PX-Her0 is a low-power ARM Cortex MO+ based development board that was developed for use in embedded education applications. The board comes with an ecosystem of tools including an open-source C library, and detailed […]
Meet I-Pi SMARC, the Industrial-Ready Prototyping Platform from ADLINK
https://www.electronics-lab.com/meet-pi-smarc-industrial-ready-prototyping-platform-adlink/
One of the major barriers to developing industrial applications is usually the complexity and cost of the development/prototyping platforms. A lot of SOMs, SOCs and board manufacturers, including ADLINK, have taken stabs at this problem with different solutions. Leveraging on the experience with their previous products, ADLINK recently announced the launch of a new product […]
TI AM335x ARM SoM for Gateway Applications
https://www.electronics-lab.com/ti-am335x-arm-som-gateway-applications/
MYIR introduces an Linux-ready industry-oriented MYC-C335X-GW CPU Module powered by TI’s AM335x ARM Cortex-A8 processor (800MHz AM3354 by default) which features PowerVR™ SGX530 for 2D and 3D graphics acceleration. Measuring only 50mm by 40mm, the MYC-C335X-GW is the fourth AM335x CPU Module designed by MYIR especially for gateway applications. It integrates a DDR3L RAM memory, […]
High efficiency: A multi-mode, forced-frequency-resonant digital controller IC for SMPS applications
https://www.electronics-lab.com/high-efficiency-multi-mode-forced-frequency-resonant-digital-controller-ic-smps-applications/
Infineon Technologies launches the XDP™ digital power XDPS21071, the first flyback controller in the industry with zero-voltage switching (ZVS) on the primary side to achieve high efficiency. This controller is aimed at fast-charging applications such as USB-PD or QuickCharge. Light-load efficiency is optimized for variable output application. The XDPS21071 is a high-performance digital flyback controller […]
Arrow Electronics introduces low-cost, rapid prototyping data acquisition platforms
https://www.electronics-lab.com/arrow-electronics-introduces-low-cost-rapid-prototyping-data-acquisition-platforms/
Low-power, low-noise Analog Devices ICs and Intel MAX 10 FPGA in compact 86.5mm x 25mm outline Analog Devices and Arrow Electronics have worked with Trenz Electronic GmbH to produce three ready-to-use data-acquisition platforms that relieve the design and electronics manufacturing services for developers of professional measurement instruments. Benefits of the AnalogMAX-DAQ1 Platform: High-accuracy analog front-end: […]
Mini USB-C PD sink board enables Power regulation for any device
https://www.electronics-lab.com/mini-usb-c-pd-sink-board-enables-power-regulation-device/
The USB-C PD-Sink is a board by Pier 42 that enables any device to be powered from a USB supply. It allows the option to set the voltage at 5V, 9V, 12V, 15V or 20V and allowing current as high as 5A. The current settings are very flexible in steps of 250mA from 0 to […]
Arduino Ethernet Shield powered by the PIC32MX controller
https://www.electronics-lab.com/arduino-ethernet-shield-powered-pic32mx-controller/
Angelu (Elsofgel), a Canadian-based electrical engineer has developed an Arduino shield to implement an SPI to Ethernet Interface (SEI) on the PIC32 microcontroller. While it seems very similar to the Wiznet’s chips, the major difference being that it is a software implementation and the physical layer (PHY) is an external device. It interfaces the host […]
L6983 38 V Step-Down Converter is a synchronous monolithic step-down regulator
https://www.electronics-lab.com/l6983-38-v-step-converter-synchronous-monolithic-step-regulator/
STMicroelectronics’ step-down converter is an easy to use synchronous monolithic step-down regulator STMicroelectronics L6983 Synchronous Step-Down Converter is an easy to use monolithic step-down regulator capable of delivering up to 3A DC to the load. The wide input voltage range makes the device suitable for a broad range of applications. The L6983 is based on […]
Low Power Brushed DC Motor Driver IC from Toshiba in Compact HSOP8 Package
https://www.electronics-lab.com/low-power-brushed-dc-motor-driver-ic-toshiba-compact-hsop8-package/
Toshiba Electronic Devices has added the TB67H451FNG Motor Driver IC to its lineup of low power consumption brushed DC motor driver ICs. The new IC comes in the popular pin-assignment HSOP8 package and features automatic return after over-current detection. Over-current detection is a safety function that prevents damage to the IC by turning off the […]