moRFeus – A field-configurable wideband frequency converter and signal generator
https://www.electronics-lab.com/news/morfeus-field-configurable-wideband-frequency-converter-signal-generator/
MoRFeus is a 30 MHz–6 GHz field-configurable Fractional-N wideband frequency converter and signal generator. Its LCD display and button interface enable dynamic field-level configuration – from switching between signal generator and other modes, to setting the local oscillator frequency and more. It was designed for wideband frequency up- and down-conversion – with an LO frequency […]
Microchip MC1409UK – MPU based system on module
https://www.electronics-lab.com/news/microchip-mc1409uk-mpu-based-system-module/
Simplify industrial-grade Linux® designs with SAMA5D2 MPU-based system on module (SOM) with Microchip’s MC1409u. There is a great deal of design effort and complexity associated with creating an industrial-grade microprocessor (MPU)-based system. The ATSAMA5D27-SOM1, which contains the ARM® Cortex®-A5 ATSAMA5D27C-D1G-CU System in Package (SiP), greatly simplifies design by integrating the power management, non-volatile boot memory, […]
Phytec Develops Three PhyCore Modules – i.MX8, i.MX8M, and iMX8X, Driven By Linux
https://www.electronics-lab.com/news/phytec-develops-three-phycore-modules-i-mx8-i-mx8m-and-imx8x-driven-by-linux/
Phytec has updated their product pages for three new PhyCore modules, all of which support Linux. The three modules, which employ three different flavors of i.MX8 SOC is phyCORE-i.MX 8X, i.MX 8M, and i.MX 8 SBCs. The PhyCore COMs are based on NXP’s Cortex-A53 based i.MX8M, its -A53 and -A72 equipped i.MX8 Quad, and its -A35 based i.MX8X. phyCore-i.MX 8X The i.MX8X SoC found […]
PICO316 – The New Pico-ITX SBC Powered By Intel Apollo Lake Processors
https://www.electronics-lab.com/news/73113-2/
Axiomtek, a Taiwan based company has introduced new Pico-ITX form factor SBCs using Intel’s Apollo Lake processor. This line of SBCs from Axiomtek started with PICO312 with minimal coastline ports, and then followed with a COM-like PICO313. Recently they launched a similar 100 x 72mm PICO316 SBC with more versatile ports than the original PICO312. This PICO316 SBC […]
1W regulated SMT DC/DC converter can be used in alternative energy
https://www.electronics-lab.com/news/1w-regulated-smt-dc-dc-converter-can-used-alternative-energy/
Expanding its range of embedded-core DC/DC converters, Murata Power Solutions adds the NXF1 series of regulated, high isolation converter with 3.3 or 5.0V outputs. Inputs available are nominal 3.3 and 5.0V in an industry-standard, surface-mount package with a low profile of 5.1mm. Line regulation is typically better than 0.03 per cent and load regulation is […]
4 Channel Relay Shield for Arduino UNO
https://www.electronics-lab.com/news/4-channel-relay-shield-arduino-uno/
4 Channel Relay Shield for Arduino UNO is a simple and convenient way to interface 4 relays for switching applications in your project. Very compact design that can fit on top of Arduino UNO. Project requires 12V DC supply, all 4 trigger inputs require TTL signal, Relay-1 to Relay-4 inputs connected to D8 To D11 […]
4 Channel Relay Shield for Arduino UNO
https://www.electronics-lab.com/project/4-channel-relay-shield-arduino-uno/
4 Channel Relay Shield for Arduino UNO is a simple and convenient way to interface 4 relays for switching applications in your project. Very compact design that can fit on top of Arduino UNO. Project requires 12V DC supply, all 4 trigger inputs require TTL signal, Relay-1 to Relay-4 inputs connected to D8 To D11 […]
Arduino Real Time Clock with Temperature Monitor
https://www.electronics-lab.com/news/arduino-real-time-clock-temperature-monitor/
Hi guys, in one of our previous tutorials, we built a real-time clock with temperature monitor using the DS3231 and the 16×2 LCD display shield. Today, we will build an upgrade to that project by replacing the 16×2 LCD display with an ST7735 based 1.8″ colored TFT display. Apart from changing the display, we will […]
Arduino Real Time Clock with Temperature Monitor
https://www.electronics-lab.com/project/arduino-real-time-clock-temperature-monitor/
Hi guys, in one of our previous tutorials, we built a real-time clock with temperature monitor using the DS3231 and the 16×2 LCD display shield. Today, we will build an upgrade to that project by replacing the 16×2 LCD display with an ST7735 based 1.8″ colored TFT display. Apart from changing the display, we will […]
Artila M-X6ULL is a Linux-ready Cortex-A7 SoM with a Real Time patch
https://www.electronics-lab.com/news/artila-m-x6ull-linux-ready-cortex-a7-som-real-time-patch/
Artila Electronics, a professional in development and manufacture of ARM-based embedded Linux systems, has released a SODIMM module M-X6ULL based on NXP i.MX6ULL processor family. The new M-X6ULL is designed to meet the needs of many general embedded applications that require power efficient, high performance and cost optimized solution, as well as embedded systems that require high-end multimedia applications […]