DFI RPS101/RPS103 Mini-ITX Motherboard with Intel Core and R680E/Q670E/H610E Chipsets for Automation and Kiosk Applications
https://www.electronics-lab.com/dfi-rps101-rps103-mini-itx-motherboard-with-intel-core-and-r680e-q670e-h610e-chipsets-for-automation-and-kiosk-applications/
The DFI RPS101/RPS103 is a Mini-ITX industrial motherboard designed specifically for automation and kiosk applications. It supports Intel Core processors from the 12th to the 14th generation, making it suitable for real-time processing in industrial environments. With a compact form factor, the motherboard still allows high performance, supporting up to 64GB of DDR5 memory at […]
Datanoise PicoADK v2: a DSP with Raspberry Pi RP2350A
https://www.electronics-lab.com/datanoise-picoadk-v2-a-dsp-with-raspberry-pi-rp2350a/
Datanoise is a Berlin-based music hardware company, that recently released the PicoADK v2 by Datanoise, the successor to PicoADK v1 is designed for Audio Digital Signal Processing (DSP). It is a Synthesizer Development Platform used for building and experimenting with sound synthesis. It provides the essential building blocks like processing power, inputs/outputs, and libraries for […]
AAEON Reimagines its Flagship UP Board with the Introduction of the UP 710S
https://www.electronics-lab.com/aaeon-reimagines-its-flagship-up-board-with-the-introduction-of-the-up-710s/
Wi-Fi support, serial communication, and a slimmer design make the UP 710S a modernized industrial board with deep ties to its origins. AAEON‘s UP brand , which began with the creation of the credit-card sized UP developer board almost a decade ago, has introduced the UP 710S, a modernized, slimline 85mm x 56mm single-board that […]
xMEMS Introduces Sycamore, the World’s First 1-mm Thin Near-Field Full-Range MEMS Micro Speaker
https://www.electronics-lab.com/xmems-introduces-sycamore-the-worlds-first-1-mm-thin-near-field-full-range-mems-micro-speaker/
At one-seventh the size and one-third the thickness of conventional dynamic-drivers, Sycamore gives product designers the space and freedom to innovate thinner and lighter mobile device form factors. Santa Clara, California, November 19, 2024 – xMEMS Labs, developers of the foremost platform for piezoMEMS innovation and creators of the world’s leading all-silicon micro speakers, today […]
Bluetooth Wireless Robot Car Controller
https://www.electronics-lab.com/project/bluetooth-wireless-robot-car-controller/
This project presents a robot car controller that utilizes a Bluetooth wireless controller, allowing users to control the small robot car using a smartphone and an Android app. The system consists of an Arduino microcontroller (ATMEGA328), an HC-05 Bluetooth module, two BD6211 H-Bridge motor drivers, and an onboard DC-DC converter that provides 5V power to […]
KAGA FEI ES4L15BA1 Low-Power BLE Module Features Cortex-M33, RISC-V Coprocessor, and Multi-Rate BLE Support
https://www.electronics-lab.com/kaga-fei-es4l15ba1-low-power-ble-module-features-cortex-m33-risc-v-coprocessor-and-multi-rate-ble-support/
Kaga FIE has recently announced the ES4L15BA1, a Low-Power BLE wireless module that’s currently under development, designed to offer high-performance connectivity with Bluetooth 6.0, supporting data rates of 2M, 1M, 500k, and 125kbps, as well as advanced features like Angle of Arrival (AoA), Angle of Departure (AoD), and channel sounding. Operating within the 2402–2480 MHz […]
Ingition Coil Driver
https://www.electronics-lab.com/project/ingition-coil-driver/
The project presented here is an Ignition coil driver featuring FAN1100-F085 ignition gate driver chip and IGBT. Chip is designed to directly drive an ignition IGBT and control the current and spark event of the coil. The coil current is controlled via the input signal pin. When the input is driven high, the output of […]
Isolated Power Supply with 24V Input and Dual 15V Output
https://www.electronics-lab.com/project/isolated-power-supply-with-24v-input-and-dual-15v-output/
This isolated power supply features the SN6507 chip, a push-pull isolation transformer driver, which provides a reliable and efficient power conversion solution. The power supply comprises a transformer, rectifier circuit, and isolation transformer T1, which separates the input and isolated output, ensuring electrical isolation and preventing high voltages and noise from interfering with or damaging […]
Compex Systems Unveils Wi-Fi 7 Modules with Smart Connectors, Enabling Seamless Multi-Link Operation (MLO) Integration on Conventional CPU Platforms
https://www.electronics-lab.com/compex-systems-unveils-wi-fi-7-modules-with-smart-connectors-enabling-seamless-multi-link-operation-mlo-integration-on-conventional-cpu-platforms/
Compex Systems (Compex), a global leader in wireless communication technology, is taking Wi-Fi 7 to new heights with an innovative connector design for Multi-Link Operation (MLO). This breakthrough enables seamless deployment of MLO across off-the-shelf platforms, including those with Intel x86 and ARM processors (e.g. NXP and Marvell), eliminating the need for custom-made host boards […]
Teensy 4.1 Expansion Board with DC-DC Converter
https://www.electronics-lab.com/project/teensy-4-1-expansion-board-with-dc-dc-converter/
The Teensy 4.1 expansion I/O shield is designed to simplify the connection process, saving you time and effort in your project development. With its compact design and ease of use, this board is perfect for prototyping, proof-of-concept development, and production-ready applications. Whether you’re a hobbyist, student, or professional, this board is essential for anyone working […]