Liquid-Level Monitoring Using a Pressure Sensor – Bar-Graph Display

Liquid-Level Monitoring Using a Pressure Sensor – Bar-Graph Display

This project allows users to monitor the liquid level on a Bar-Graph display. The liquid level is measured using a pressure sensor, the sensor is placed on top of the tank and is connected to an open-ended tube that is submerged in the water tank. The amount of water in the tank...

Continue Reading
1.470
Views
0 Comments
Digital Pressure Gauge 0 to 10kPa (0 to 1.75 psi) with OLED display

Digital Pressure Gauge 0 to 10kPa (0 to 1.75 psi) with OLED display

The project presented here is a Digital Pressure Gauge using an OLED display. The measuring range of this unit is 0 to 10kPa (0 to 1.75 psi). Additional this compact open-source hardware is Arduino compatible. This board can be used for measuring low pressure up to 1.75psi with great...

Continue Reading
5.159
Views
0 Comments
Liquid or Air Pressure Switch with Relay

Liquid or Air Pressure Switch with Relay

This pressure switch project is built using a piezoresistive transducer, LM358 OPAMP as comparator, and a relay. The circuit activate the relay when the pressure in a system exceed a given set-point. Basically, this switch can power ON or OFF a pump, valve, motor, when certain...

Continue Reading
5.059
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives