Mini Robot Controller Using Infra-Red Remote for Small and Medium Size Robot
https://www.electronics-lab.com/project/mini-robot-controller-using-infra-red-remote-for-small-and-medium-size-robot/
The Robot Controller is a very compact solution for controlling small and medium size robots using an Infrared remote. The project is fully Arduino compatible and consists of an ATMEGA328 microcontroller, 2 x BD6211 motor drivers, TSOP1838 IR sensor. BD6211 H-bridge is a full bridge driver for brush motor. The reference pin of BD6211 is […]
Arduino Nano- Switching ON/OFF Appliances Using Infra-Red Remote (Two Channel)
https://www.electronics-lab.com/project/arduino-nano-switching-on-off-appliances-using-infra-red-remote-two-channel/
The project presented here is a two-channel infrared remote ON/OFF switch that can be used to control home appliances, Lights, Fans, Water Pumps, Aquarium pumps, Ovens, Heaters, etc. This open-source project contains 2 x SSR (Solid State Relay), Arduino Nano, and TSOP1838 infrared receiver, keeping safety in mind, optically isolated SSR (Solid State Relay) is […]
Infrared Remote-Controlled AC Load ON/OFF switch with SSR
https://www.electronics-lab.com/project/infrared-remote-controlled-ac-load-on-off-switch-with-ssr/
Driving an AC high voltage and current load using an Infrared remote is very easy with this project. This is an open-source Arduino compatible hardware that is based on ATMEGA328 microcontroller, SSR (Solid-state Relay), Infrared Receiver TSOP1838, and analog input interface. We have used KSD215AC3 optically isolated solid-state relay to drive AC loads. We have […]
Brushed DC Motor Controller Using Infra-Red Remote
https://www.electronics-lab.com/project/brushed-dc-motor-controller-using-infra-red-remote/
This project enables the user to control a Brushed DC Motor using an Infra-Red Remote Control, thus controlling speed, direction, and also brake of DC Motor is possible. It’s an Arduino compatible open-source hardware that helps you develop many DC Motor control applications. The user has to write the code as per the application requirement. […]
8 Channel Infra-Red Remote-Control Arduino Shield Using ULN2803
https://www.electronics-lab.com/project/8-channel-infra-red-remote-control-arduino-shield-using-uln2803/
This is an 8 channel infra-red remote-control Arduino shield that can drive 8 high current loads such as LEDs, solenoids, multiple toy DC Motors, dual unipolar stepper motor, filament lamps, etc. Each channel consists of two parallel NPN transistors with freewheel diodes which are important to drive inductive loads like motors. The shield consists of […]
8 Channel Inductive Load Driver Arduino Shield
https://www.electronics-lab.com/project/8-channel-inductive-load-driver-arduino-shield/
The 8 Channel Driver Arduino UNO Shield is designed to enable users to switch inductive loads for up to 800mA each channel and up to 24V DC with no heat-sink needed. It is ideal for such applications as driving 2x unipolar stepper motors, solenoids, relays, and small DC motors. It uses 2x DRV8803 Chip from […]