MP6612 – 45V, 5A, H-Bridge DC Motor Driver with Current Sense and IN1/IN2 Logic Inputs
ICMotor

MP6612 – 45V, 5A, H-Bridge DC Motor Driver with Current Sense and IN1/IN2 Logic Inputs

The MP6612 from Monolithic Power Systems is a Half-Bridge DC Motor Driver that is used for driving reversible motors. It requires an input voltage of 4-45 V for operation and has an output current of up to 5 A. The motor driver consists of four N-channel power MOSFETs and an internal...

Continue Reading
1.108
Views
0 Comments
1200V High-Current Half-Bridge using FAN73912
PowerTop Stories

1200V High-Current Half-Bridge using FAN73912

The project presented here is designed for high-voltage and high-speed driving for MOSFETS and IGBTs that operate up to +1200V. The project consists of a FAN73912 gate driver chip and 2 x IGBTs, DC bus capacitors, current sense resistor for current feedback etc. The advanced input...

Continue Reading
1.104
Views
0 Comments
High Current Half-Bridge with Over Current & Voltage Feedback for Step Down DC-DC Converter
Power

High Current Half-Bridge with Over Current & Voltage Feedback for Step Down DC-DC Converter

This project enables the user to create a high current DC-DC converter. The project consists of a high current inductor, high current low voltage 2 x MOSFETs, half-bridge driver LT1158 chip, voltage feedback using onboard R9 and R10 resistor dividers, shunt resistor for overcurrent...

Continue Reading
1.116
Views
0 Comments
Monolithic Power Systems (MPS) MP6610 55V 3A Half-Bridge Power Drivers
IC

Monolithic Power Systems (MPS) MP6610 55V 3A Half-Bridge Power Drivers

Monolithic Power Systems (MPS) MP6610 55V 3A Half-Bridge Power Drivers offer current measurement and regulation features in a small pin package. The MP6610 features up to 3A of output current across a wide 4V to 55V input voltage range is ideal for driving brushed DC motors, solenoids,...

Continue Reading
1.074
Views
0 Comments
High Current Half-Bridge with Over Current Shutdown
PowerTop Stories

High Current Half-Bridge with Over Current Shutdown

The project presented here is a versatile high voltage Half-Bridge with Over-Current Shutdown. The project is built using LT1158 IC from Analog Devices. It is suited for many applications as listed below. A single input pin on the LT1158 synchronously controls two N-channel power...

Continue Reading
1.147
Views
0 Comments
BLDC Motor and DC Brushed Motor Driver
Motor

BLDC Motor and DC Brushed Motor Driver

This BLDC motor driver board is equipped with a smart IFX007T half-bridge. The BLDC motor control project is capable to drive one BLDC motor. Alternatively, it can be used to drive one or two bi-directional DC motors (H-Bridge configuration, cascaded to support the second motor) or up...

Continue Reading
1.229
Views
0 Comments
Nexperia Industrial & Automotive LFPAK56D half-bridge MOSFETs
Parts

Nexperia Industrial & Automotive LFPAK56D half-bridge MOSFETs

LFPAK56D half-bridge - 60% lower parasitic inductance and improved thermal performance A series of half-bridge (high side & low side) MOSFETs constructed in the space-saving LFPAK56D package format. Occupying 30% lower PCB area compared to dual MOSFETs for 3 phase motor control...

Continue Reading
1.285
Views
0 Comments
STDRIVEG600 Gate Driver for GaN Transistors
IC

STDRIVEG600 Gate Driver for GaN Transistors

STMicroelectronics' single-chip half-bridge gate driver is designed for enhancement mode GaN FETs or N-channel power MOSFETs STMicroelectronics' STDRIVEG600 is a single-chip half-bridge gate driver for enhancement mode GaN FETs or N-channel power MOSFETs. The high-side section is...

Continue Reading
1.567
Views
0 Comments
Subscribe to Blog via Email

After subscribing you can choose how often you will receive our updates: https://wordpress.com/following/manage

Join 97,571 other subscribers
Archives