SP209 Series – 9 channel 200 MSPS logic analyzer with protocol decoders
https://www.electronics-lab.com/sp209-series-9-channel-200-msps-logic-analyzer-protocol-decoders/
SP209 series logic analyzers and protocol decoders offer in depth analysis of logic signals and protocols with 200MHz (5ns) timing resolution. 9-channel operation allows 8-bit parallel data to be captured along with a clock or strobe signal. SP Series is composed of two devices, SP209 and SP209i: The SP209 is the standard edition and SP209i […]
Ikalogic logic analyzers come with open source protocol decoder scripts
https://www.electronics-lab.com/ikalogic-logic-analyzers-come-open-source-protocol-decoder-scripts/
The MicroUSB-connected ScanaQuad series of 4-channel logic analyzers from Ikalogic perfectly fit serial protocols debugging and diagnostic purposes for the like of I2C, SPI, RS232, CAN or 1-Wire. By Julien Happich @ eenewseurope.com Smaller than a matchbox and available in four versions, the ScanaQuad Logic analyzer captures or generates signals or do both simultaneously, not […]
IkaScope – a new wireless oscilloscope probe
https://www.electronics-lab.com/ikascope-new-wireless-oscilloscope-probe/
ikalogic.com launched “IkaScope” a new wireless oscilloscope probe that is able to make measurements directly on your mobile phone or your laptop. IkaScope transfers measured signals over high speed wifi connection and it will remember your home or office access points. It will work with iOS, Android and Windows devices (OSx will also be supported). […]