STMicroelectronics Ushers in Smart Motion Tracking With Dual-Range IMU


https://www.electronics-lab.com/stmicroelectronics-ushers-in-smart-motion-tracking-with-dual-range-imu/

The ISM6HG256X is a six-axis IMU with dual-range accelerometers, a high-range gyroscope, and a machine learning core for tracking everything from small motions to large shocks.

Melexis Aims To Simplify Automotive System Design With Inductive Sensor


https://www.electronics-lab.com/melexis-aims-to-simplify-automotive-system-design-with-dual-input-inductive-sensor-integrated-circuit/

The new MLX90514 dual-input inductive sensor processes signals from two coil sets simultaneously to compute differential or vernier angles on-chip, reducing complexity in vehicle control systems.

Smart Glasses Get an Upgrade With TDK’s Custom-Built, Motion-Tracking IMU


https://www.electronics-lab.com/smart-glasses-get-an-upgrade-with-tdks-custom-built-motion-tracking-imu/

The SmartMotion ICM-45685 sensing solution is designed for high-precision, ultra-low power motion tracking and on-chip image stabilization for AI and augmented reality-enabled smart glasses and eyewear.

PIR Motion Sensor LED Ceiling Light – Arduino Compatible


https://www.electronics-lab.com/pir-motion-sensor-led-ceiling-light-arduino-compatible/

This motion sensor LED ceiling light board has been designed using 4 white LEDs each of 1-3W, PIR sensor module, Atmega328 microcontroller, low ohm IRLR7843 MOSFET, and few other components. The PIR sensor detects the infra-red rays emitted by human motion within the detection area and switches on the 4 white LEDs for 10 seconds.  […]

TIG Announces Bluetera II Open Source IoT Motion-Based Development Board


https://www.electronics-lab.com/tig-announces-bluetera-ii-open-source-iot-motion-based-development-board/

Tensor Iotera Group (TIG) has announced its new Bluetera II open source full-stack development board, which according to the company uses Google’s Protocol Buffer technology for motion-based IoT applications. TIG says that the Bluetera II is the second generation module. Bluetera II is built to fill the gap for an open source platform that meets the following […]

Motion sensor offers low-power settings


https://www.electronics-lab.com/motion-sensor-offers-low-power-settings/

Susan Nordyk @ edn.com writes: Small enough for wearable devices, STMicroelectronics’ LIS2DW12 three-axis accelerometer draws only 50 nA in standby mode and 380 nA in low-power mode at a 1.6-Hz output data rate, adding negligible load on the battery. Operating from a supply voltage of 1.62 to 3.6 V, the LIS2DW12 enables extended operation from […]