HealthyPi Move: Open-Source Biometric Monitor in a Watch Form Factor
https://www.electronics-lab.com/healthypi-move-open-source-biometric-monitor-in-a-watch-form-factor/
HealthyPi Move is an open-source biometric monitor in a sleek watch form factor, designed for continuous or intermittent monitoring of vital biometric signals such as ECG, heart rate, HRV, PPG, SpO₂, blood-pressure trends, and respiration. Engineered for both everyday use and advanced research applications, HealthyPi Move integrates health tracking seamlessly into personal wellness routines and […]
AS7038RB Biosensor Solution with Embedded ECG Channel
https://www.electronics-lab.com/as7038rb-biosensor-solution-with-embedded-ecg-channel/
ams’ biosensor solution is based on photoplethysmography and electrocardiogram The operation of the ams AS7038RB is based on photoplethysmography (PPG) and electrocardiogram (ECG). PPG is the most used HRM method, which measures pulse rate by sampling light modulated by the blood vessels, which expand and contract as blood pulses through them. PPG is also used […]
Multi-sensor SpO2 and Heart Rate Monitor (HRM) reference design with Bluetooth® 5
https://www.electronics-lab.com/multi-sensor-spo2-heart-rate-monitor-hrm-reference-design-bluetooth-5/
This reference design enables a wearable, optimized saturation of peripheral capillary oxygen (SpO2) and multi-sensor, multi-wavelength optical heart rate monitor (HRM). It uses AFE4420 device, which is a single-chip, bio-sensing front end for photoplethysmography (PPG) measurements. It supports up to four switching light-emitting diodes (LEDs) and up to four photodiodes to enable signal acquisition of […]
tinyPulsePPG – ATTiny85 Pulse oximeter with photoplethysmogram
https://www.electronics-lab.com/tinypulseppg-attiny85-pulse-oximeter-photoplethysmogram/
tinyPulsePPG, an ATTiny85 Pulse Oximeter with Photoplethysmogram (PPG) display by Jeff Magee: This project implemented on an ATTiny85 displays a moving Photoplethysmogram together with pulse rate and estimates of SpO2 – blood oxygen percentage. It uses an SSD1306 128×32 OLED display and a Max30102 sensor. It is emphasized that this should not be used for […]
MAX86150 Integrated in-Sync PPG and ECG Biosensor Module for Mobile Devices
https://www.electronics-lab.com/max86150-integrated-ppg-ecg-biosensor-module-mobile-devices/
Maxim’s MAX86150 delivers both photoplethysmogram (PPG) and electrocardiogram (ECG) measurements for health monitoring from a mobile, battery-powered device. The MAX86150 is a biosensor module comprised of internal LEDs, photodetectors, and an ECG analog front-end (AFE) to provide highly accurate, FDA-certifiable PPG and ECG performance in compact power-saving designs which include mobile phones, laptops, tablets, and […]
Easy Pulse mikro – MikroBus form factor pulse sensor
https://www.electronics-lab.com/easy-pulse-mikro-mikrobus-form-factor-pulse-sensor/
Raj @ embedded-lab.com has designed a new version of his Easy Pulse Sensor. This revision is an add-on board in mikroBus form factor, which enables easy integration with mikroElektronika‘s numerous development boards. It also operates on the principle of transmittance photoplethysmography applied to a fingertip using infrared sensors. Easy Pulse mikro provides all necessary instrumentation and […]