Tag: RJ45

Pimoroni has introduced the Raspberry Pi PoE+ Injector, a compact device designed to add Power-over-Ethernet (PoE) functionality to a single port on a non-PoE Ethernet switch. It delivers both power and data through a single Ethernet cable, offering a cost-effective, plug-and-play...

Asus has introduced the NUC 15 Pro+, a high-performance, AI-optimized mini PC powered by the Intel Core Ultra 9 285H processor with Intel Arc 140T Graphics. Offering up to 99 TOPs of AI performance and an 18% boost over previous-generation NUC models, this compact system is designed for...

The CM5-NANO-B is a CM5 carrier board designed for the Raspberry Pi Compute Module 5 (CM5), integrating essential I/O interfaces in a compact form factor. It features a USB 3.2 Gen1 port, HDMI output, an audio interface, and an Ethernet port, making it suitable for embedded applications...

The uCOM Carrier Board serves as a baseboard designed to support a wide range of interfaces defined by the EAuCOM standard. This standard, developed by Embedded Artists, is built around i.MX RT/6/7/8/9 SoCs. An EAuCOM board typically integrates the i.MX RT/6/7/8/9 SoC along with...

The Mecha Comet is a modular Linux handheld computer developed by Mecha Systems Inc., designed for developers, makers, and tinkerers. Showcased at CES 2025, the device focuses on modularity, repairability, and open-source design, making it ideal for development, prototyping, and...

Luckfox Lyra is a Linux micro development board based on the Rockchip RK3506G2 SoC. This multi-core heterogeneous processor integrates a quad-core 32-bit CPU with three ARM Cortex-A7 cores and one ARM Cortex-M0 core, fabricated using a 22nm process. Designed for embedded applications,...

The AMPCOM 2.5GbE Managed Switch is a high-performance 9-port Ethernet switch featuring 8 RJ45 ports (100/1000/2500 Mbps) and a 10G SFP+ uplink port, designed for seamless network connectivity and management. Various IEEE standards are supported by the switch, and QoS prioritization,...

The ESP32-P4-NANO by Waveshare is a high-performance development board powered by the ESP32-P4 MCU. It features a RISC-V 32-bit dual-core high-performance (HP) processor with DSP and instruction set expansions, integrated floating-point units (FPU), and a maximum frequency of 400 MHz....