AGS Devices and Celus Accelerate End-to-End Design to Procurement
https://www.electronics-lab.com/ags-devices-and-celus-accelerate-end-to-end-design-to-procurement/
The Celus Design platform is now available through AGS Devices, featuring AI-powered application-ready schematic generation with AGS Devices’ real-time component sourcing.
FlashMyPico: Web-Based Firmware Flashing for Raspberry Pi Pico & RP2350 Microcontrollers
https://www.electronics-lab.com/flashmypico-web-based-firmware-flashing-for-raspberry-pi-pico-rp2350-microcontrollers/
FlashMyPico website works as an application programming interface, an easy-to-use online tool that allows easy integration with your existing build system. This website allows users to write C/C++ codes, build the firmware, and flash it to their Raspberry Pi Pico, Pico W, Pico 2, or Pico 2 W directly from a web browser instead of […]
SignalSDR Pro: Compact SDR Platform with AD9361 RF Transceiver and AMD Zynq 7020 SoC
https://www.electronics-lab.com/signalsdr-pro-compact-sdr-platform-with-ad9361-rf-transceiver-and-amd-zynq-7020-soc/
The SignalSDR Pro is a compact software-defined radio (SDR) platform designed for signal processing, spectrum analysis, and advanced communication systems. It is based on the Analog Devices AD9361 RF transceiver and the AMD Zynq 7020 SoC, providing a versatile solution for a range of SDR applications. Its small form factor matches the size of a […]
Edgeberry IoT Platform features 3A step-down converter, CAN-bus, USB interfaces, etc
https://www.electronics-lab.com/edgeberry-iot-platform-features-3a-step-down-converter-can-bus-usb-interfaces-etc/
The Tindie has recently launched Edgeberry, an open-source platform developed by SpuQ in Belgium for building IoT Edge solutions using a Raspberry Pi. This IoT includes a base board, hardware cartridges, and software to enhance Raspberry Pi’s IoT capabilities. The Edgeberry Base Board connects to the Raspberry Pi’s GPIO header and provides features like a […]
EasyEnclosure: Advanced 3D Modeling Software Specializing in Enclosure Design
https://www.electronics-lab.com/easyenclosure-advanced-3d-modeling-software-specializing-in-enclosure-design/
3D printing is everywhere, from complex prototypes to simple DIY projects. To meet your design and prototyping needs, you need good 3D design software and the skills to use it. However, the challenge is that even with a design idea, you might struggle to create it due to the difficulty of using the design software. […]
All You Need To Know About CFD Modeling Software
https://www.electronics-lab.com/all-you-need-to-know-about-cfd-modeling-software/
The popularity of CFD Modeling Software has been on the rise over the last few years. Multiple companies worldwide finally noticed its massive potential and implemented it into their design processes to improve accuracy and efficiency. Currently, CFD Modeling Software is extensively used to conduct fluid flow and heat transfer simulations, making it an essential […]
Raspberry Pi Fleet Management with Qbee
https://www.electronics-lab.com/raspberry-pi-fleet-management-with-qbee/
A smart approach to tackle device management In recent years, the popularity of Raspberry Pi has shot up, leading to a growing demand for efficient device management solutions. Currently, some solutions available for device management include: Automated SSH logins Pre-built image with adequate security measures in place. Device management software/system. The optimum choice, according to […]
Analyze Logic Signals with SP1000G Series Logic Analyzer
https://www.electronics-lab.com/analyze-logic-signals-with-sp1000g-series-logic-analyzer/
SP1000G series logic analyzers and arbitrary pattern generators, with a timing resolution of 1ns (1GSPS), can analyze logic signals and protocols in great detail. External reference clocking (IN and OUT), trigger input and output, and a threshold and output voltage level that can be adjusted making the SP1000G series a very powerful piece of lab […]
Arduino IDE 2.0 Leaves Beta – Becomes the Default Stable Software for Users
https://www.electronics-lab.com/arduino-ide-2-0-leaves-beta-becomes-the-default-stable-software-for-users/
Arduino has now declared the Arduino IDE 2.0 ready for primetime use, effectively ending the era of the previous Arduino IDE. The Arduino team stated that moving it from the beta version to the general release was a result of the feedback they received from the Arduino community which has helped them focus on what […]
Cerebras Systems Sets Record in the Field of AI Training
https://www.electronics-lab.com/cerebras-systems-sets-record-in-the-field-of-ai-training/
Cerebras Systems recently achieved an incredible milestone in the field of Artificial Intelligence (AI) model training. Cerebras announced the ability to train multi-billion parameter AI models on a single CS-2 system. The Cerebras Systems claims to be able to train complex Natural Language Processing (NLP) models with up to 20 billion parameters on a single […]